Operating instructions

TD 92579GB
2009-04-15/ Ver. B
Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 3.0.x)
94
Call Number (CGPN/CDPN) Mappings
For every interface, it is possible to store mappings for CGPN In, CDPN In, CGPN Out and
CDPN Out (explained in the table below), enabling call numbers and call number formats
to be adjusted for incoming and outgoing calls.
Call Number Mappings Table
1 Select Gateway > Interfaces.
2 For the interface that you want to set up call number modifications on, click the
“+” sign next to the interface name. A new window opens and call number
mapping can be made for the interface.
Figure 39. Call number mapping for SIP interfaces
3 Select one of the following mapping lines.
Map name Description Used to
CGPN In Calling Party Number In edit the calling number of incoming calls
CDPN In Called Party Number In edit the called number of incoming calls
CGPN Out Calling Party Number Out edit the calling number of outgoing calls
CDPN Out Called Party Number Out edit the called number of outgoing calls
Figure 56.
Field name Description
• CGPN in if you want to edit the calling number of incoming calls.
Digits used for the headmatch on the received number. In
addition to the normal dialling digits (0..9,*,#) the
following characters have special meaning:
R If 'R' is used as first digit of the number only numbers
with 'presentation restricted' match. In this case the
'presentation restricted' property is cleared if 'R' is not
used on 'Number Out'.
? Can be used at any place inside the number and means
that any received digit matches.
• CGPN out If you want to edit the calling number of outgoing calls.
• CDPN in If you want to edit the called number of incoming calls.
• CDPN out If you want to edit the called number of outgoing calls.