Specifications

TD 92326GB
2009-03-10 / Ver. E
Installation and Operation Manual
VoIP Gateway
85
12.2 Interfaces – Configuration of ISDN Interfaces
1 Select Gateway > Interfaces.
Figure 66. ISDN interfaces
The first page shows ISDN interfaces and call number mapping for each interface.
12.2.1 Name and Tone
1 Select Gateway > Interfaces.
2 Click on one of the interfaces under the Interface heading. A new window opens.
Figure 67. Name and Tone selection
3 Select/Enter following settings.
4 Click “OK”.
12.2.2 Call Number Mapping
Call number mapping is made for incoming calls, for example adding leading zeros, or 9 in
US. Refer to chapter 20.1 Dealing with the various ISDN address types on page 142.
1 Select Gateway > Interfaces.
Figure 74.
Figure 75.
Field name Description
• Name Enter a name for the interface.
• Disable Disables the Interface
•Tone
a
a.Be sure to match the Tone to the country where the system is installed.
Select tone in the Tones drop-down list
• Interface Maps Manual, Point to Point or Trunk Point to Multipoint
Internal Registration
• Protocol None, H.323, SIP (over UDP), TSIP (over TCP) or SIPS
(over TLS)