Specifications

TD 92326GB

2009-03-10 / Ver. E

Installation and Operation Manual

VoIP Gateway

12 Gateway

12.1 General

1 Select Gateway > General.

Figure 65. Gateway

2 Select/Enter following settings.

3 Click “OK”.

Figure 73.

Field name Description

• Call Logging Enable if you want to log calls.

• Route Logging Enable if you want to log routing.

• Billing CDRs only If enabled only outgoing, external calls, which will be

billed, are recorded. See 12.6 CDR0/CDR1 –

Transmission of Call Detail Records on page 98.

• Logging Filter

(GW:Nr)

For support purposes. This feature allows to

temporarily reduce the logging output relating to

Diagnostics/Logging/Relay Calls. An interfaces name

and/or a number can be entered. The call logging

output will then be reduced to calls matching the

direction towards the interface/cdpn or matching the

direction from the interface/cgpn. For example,

GW1:44 shows calls towards GW1 where the CDPN

starts with 44. Calls from GW1 with the CGPN 44 will

also show up.

The lower area of the window displays the installed licenses and the current

use of these licenses.

Licenses The Count row shows how many registrations the

license is valid for, and the Usage row shows the

number of registrations.