Specifications

TD 92326GB
2009-03-10 / Ver. E
Installation and Operation Manual
VoIP Gateway
69
11.4 Objects – Registration of Subscribers etc. to the PBX Application
PBX objects are registered to the PBX Application when the PBX Application is in
operation. The indication, or not, of registered PBX objects gives a good sense of the
readiness of the system (E.164 number, H.323 name etc.).
The object types supported by Ascom are the user, the Boolean, the PBX, the gateway and
the mwi objects.
Objects Description
User The User object type is used to create standard subscribers.
Bc Conference
(Not supported)
The Call Broadcast Conference object uses a local or remote
conferencing resource (for example a CONF interface) to implement an
automatic multi-party conference. When the object is called, calls to all
members of the group are initiated and then all members can
participate in a single conference.
This object is built-in to the PBX and thus does not need a registration
to work. It will run on the PBX that is set in the PBX field.
Boolean The Boolean object type is used for announcements. A URL string
indicates to the gateway the audio file to load to enable the
announcement. Time interval for the announcements can be specified.
Call Broadcast
(Not supported)
With the Call Broadcast object, it is to possible to distribute all calls
arriving on this object to all member of a group that this Call Broadcast
object belongs to. Here, it is possible to allocate a call number to this
object, enabling in turn a call diversion, if say the subscribers of the
Broadcast group are busy or cannot be reached.
Config Template
(Not supported)
Config templates can be used to set certain parameters for many users
in an uniform fashion. Templates can be defined and then assigned to
users in the user configuration. All parameters that are not set (that is,
are empty) in the user configuration will be inherited from the
template.
Config templates can be nested by defining a config template for the
config template.
DECT System To be able to register a DECT system in the PBX application, a DECT
System object is required. All DECT-specific information is stored in this
DECT System object. During initial start-up of a DECT system, this
object must be created in an existing PBX application environment.
Directory Search
(Not supported)
The LDAP Search object allows dect users to search an ldap directory.
The user just have to dial the object number and the first three digits
(which represents characters) of the searched user name.