Specifications

TD 92326GB
2009-03-10 / Ver. E
Installation and Operation Manual
VoIP Gateway
58
10.2 Protocol – Selection of Protocol
1 Select TEL > Protocol.
Figure 52. Selection of protocol
2 Select/Enter the following settings
3 Click “OK”.
10.3 Interop – Interoperability with Other Equipment
These settings are used to work-around non-standard behaviour of other equipment and
usually nothing should be configured here.
1 Select TEL > Interop.
Figure 53. Interoperability with other equipment
Figure 60.
Field name Description
•Protocol See 22.4 The Signalling Protocols on page 155.
• Mode “Point to Point” switches on the point-to-point mode.
“Point to Multipoint” switches on the point-to-
multipoint mode.
Figure 61.