Specifications

TD 92326GB

2009-03-10 / Ver. E

Installation and Operation Manual

VoIP Gateway

4 Click “OK”.

8.3.1 Configure Full Directory Replication

1 Select LDAP > Replicator.

Figure 41. Full Replication

2 Select "Full Replication" in the Type drop-down list.

3 Select the Enable check box.

4 Enter the IP address to the LDAP server in the Server text field.

5 Enter the IP address to the alternative LDAP server in the Alt. Server text field.

Note: If this VoIP Gateway is configured as a standby LDAP server, enter "0.0.0.0"

in the Alt. Server text field.

6 Select a filter method from the Filter Type drop-down list

• PBX Name - Enter the name of the VoIP gateway to limit the replication to users

of a certain group

• LDAP Filter - Enter an LDAP filter to limit replication to certain LDAP objects

7 Enter the LDAP User name and Password in the User and Password text fields.

8 Click "OK".

Note: In the case of Master to Standby Master Full Directory Replication, do not register

new Portable Devices when the LDAP Server is down even if there is a Standby LDAP

Server in the system.

•User Enter the name (as [Windows Domain\User Name]) or the

DN (Distinguished Name) of a user with read access to the

Active Directory. If a DN is entered it will usually be one of:

cn=John Doe,cn=users,dc=innovaphone,dc=sifi, where

dc=innovaphone,dc=sifi represents the DN-setting from

above.

•Password The password required for the User-setting.

•In Maps Maps for incoming attributes must be configured here. An

in-map controls which content of which incoming attribute

goes into a runtime symbol table. See 8.3.5 In Maps.

•Out Maps Maps for outgoing or local attributes must be configured

here. An out-map controls which runtime symbol table entry

fills a local attribute. See 8.3.6 Out Maps.

Figure 41.

Figure 42.

Figure 43.