Specifications

TD 92326GB
2009-03-10 / Ver. E
Installation and Operation Manual
VoIP Gateway
24
3 Click “OK”
5.11 Telnet – Configuration via Telnet
Note: Not supported by Ascom.
The configuration procedure in this manual is described when using the Web Browser, but
the configuration is also possible to do via the Telnet program on your PC.
1 Select General > Telnet.
2 Enable the Enable telnet checkbox and click “OK”.
Figure 21. Enable configuration via Telnet
3 Click on the “reset required” link.
4 Start a Telnet session and enter your commands from there.
5.12 Certificates – Secure TLS Connections
Note: TLS for web browsing (https) is supported. VoIP security (SIPS) is not supported by
Ascom.
The Trust list contains the certificates to be accepted for TLS secured connections (e.g.
HTTPS, SIPS).
The Device certificate contains the certificate chains that have been rejected while trying
to establish a secure TLS connection. This happens for example if the certificate is expired
• Authentification Trap Enable if you want the SNMP notifications sent as traps.
Access via SNMP is only possible if the correct Community
Name is entered. If enabled a trap will be generated in the
event of access with an incorrect Community Name.
Trap Destinations List of defined trap destinations.
SNMP traps will be sent to all of the destinations.
Allowed networks List of networks allowed to send SNMP requests.
All network allowed if empty.
•
•
Address
Mask
A maximum of five authorised computers can be defined.
Figure 21.