Specifications

TD 92326GB
2009-03-10 / Ver. E
Installation and Operation Manual
VoIP Gateway
16
Note: Make sure you really want to delete the license(s). There is no confirmation request
(Do you really want to delete? Yes or No) issued prior to the delete.
1 Click on the link “delete” to the right of the license you want to delete or click
“delete all” if you want to delete all installed licenses.
5.4 Update – Automatic Software Update
Note: Not supported by Ascom.
On this page the device can be configured to poll an update server (a normal web server).
A file, pointed to by an URL, is read from the update server and executed. The Current
Update Serials section shows the values of the variables set after last successful execution
of the associated command. These values are provided as standard parameters in the
query part of the URL
1 Select General > Update.
Figure 10. Automatic software update
5.5 NTP – Source for Time and Date
The VoIP Gateway does not have a battery-backed real-time clock. The internal time will
thus be reset to 0:00 hrs, 1.1.1970 after every restart.
The correct time is not required for normal operation but if, for example call detail records
with the correct time are needed, the IP address of a source for time and date can be
specified. The VoIP Gateway will then synchronise its internal clock to the time source at
intervals specified.
1 Select General > NTP.
Figure 11. Time and date source
2 Select/Enable following settings.
Figure 9.
Figure 10.
Field name Description
• Time Server Enter the SNTP server “IP address”