Specifications

TD 92326GB

2009-03-10 / Ver. E

Installation and Operation Manual

VoIP Gateway

GATEWAY Description

With 1.01 there was an Object User with Gateway Flag – this is removed in 1.2.x. Now

there is an Object called Gateway. Users with gateway Flag to Gateway Objects has to be

re-configured.

4.2.2 Upgrade Procedure

Note: Download the current configuration before upgrading the software, see 13

Download – Save or View Current Configuration on page 101. This is merely a

precautionary measure, the existing configuration should not be affected during the

upgrade but the following configuration changes are needed due to changes in the

software.

1 Upload new boot code, see 14.3 Upload New Boot Code File on page 105.

2 Upload new firmware, see 14.2 Upload New Firmware on page 104.

3 Delete the “PBX Version=5” license. See 5.3.3 Delete installed License(s) on page

15.

4 Delete the “PBX Registration.Ascom=1000” license.See 5.3.3 Delete installed

License(s) on page 15.

5 Add appropriate licenses. See 2.8 Licences on page 6 and 5.3.1 Add License on

page 15.

6 If you want to disable the default MOH, you need to enter “off” in the “Music On

Hold URL” text field. See page 63 for more information about MOH.

7 Create a Gateway object to handle external calls, see 17.4.1 Create a Gateway

Object to handle External Calls on page 123.

8 Enter the long name of the Gateway object that routes external calls in the “Route

External Calls to” text field. This name is the same long name specified in the object

created in 17.4.1 Create a Gateway Object to handle External Calls on page 123. In

this case “Unknown_numbers”.

9 A. If a Gateway license is installed:

A.1) Select Gateway > VoIP.

A.2) Click on the GWn interface registered for the former EXTERN object.

A.3) Set the Name in the Alias list to “Unknown_numbers”.

B. Without a Gateway license:

B.1) Configure the PRI interface. See 17.4.4 Configure the PRI (ISDN) Interface on

page 124.