Specifications

TD 92326GB
2009-03-10 / Ver. E
Installation and Operation Manual
VoIP Gateway
11
4 Software Upgrade Information
Always download the current configuration before upgrading the software, see 13
Download – Save or View Current Configuration on page 101. This is merely a
precautionary measure, the existing configuration should not be affected during the
upgrade.
4.1 Upgrade to version 7.00
An upgrade to version 7.00 also implies that the licences need to be upgraded. Licences
for existing VoIP GW’s have been updated and can be downloaded, free of charge, from
the Ascom extranet.
IMPORTANT: • Software version 7.00 can only be upgraded from version 6.00, i.e. VoIP
GW’s with version 1.3.1 need to be upgraded to version 6.00 before the
upgrade to version 7.00.
• Gatekeeper licence version 6 (used by IGWP 1.3.1) or older, is not
compatible with software version 7.00 and therefore a new Gatekeeper
licence is required before the update.
• The bootcode file format of version 7 is different from earlier bootcode
file format. To upload a version 7 bootcode a version 7 firmware has to be
loaded first.
The upgrade will imply the following:
4.1.1 Download new Software
1 Enter the Ascom Extranet and select Products > Software Download.
2 Download and save the following software:
• VoIP Gateway software version 6.00
• VoIP Gateway software version 7.00
• Bootcode 7
1
Existing licence Converted licence
1 x PRI Ascom-Lic with support for 5000 users
30 x DSP channels
1 x PRI
2 x PRI Ascom-Lic with support for 5000 users
60 x DSP channels
2 x PRI
1 x Gateway Not applicable
1 x Gatekeeper version 6 1 x Gatekeeper version 7
1.The new bootcode includes a minimized web GUI.