Specifications

TD 92326GB
2009-03-10 / Ver. E
Installation and Operation Manual
VoIP Gateway
159
22.10Call Pickup
Calls for a subscriber can be picked up by other subscribers, provided they have not
already been answered. To do this, you have to know the call number of the called
subscriber or of a call group of which the subscriber is a member. A special function prefix
must be set up in the PBX Application for this purpose.
• Enter the desired prefix with which you would like to initiate the function in the Pickup
prefix dialstring field. The star “*”, for example, can be used for this purpose.
The following code must be dialled in order to pick up calls:
• The configured prefix for picking up calls (e.g. “*”)
• The call number of the subscriber whose call is to be picked up or of a call group of
which this subscriber is a member
• The hash “#” to complete the entry
If, for example, the function prefix “*” has been entered and you want to answer a call
for the subscriber with the extension 100, you have to dial the code “*100#” to pick up
the call.
No call number of a subscriber is specified in the special case of group pickup. “*#” would
be used here in the example above. As a result, the call which has not yet been answered
would be picked up by a subscriber of the same group. The subscriber who wants to
answer the call must be a member of the same group however.