Specifications
TD 92326GB
2009-03-10 / Ver. E
Installation and Operation Manual
VoIP Gateway
152
page 6. You can now find out which IP address has been assigned, using the
command “nbtstat” on a Windows PC.
C:\> nbtstat – R
C:\> nbtstat -a IGWP-XX-XX-XX
In the following example, the VoIP Gateway has the IP address 195.226.104.217.
NetBIOS remote machine name table
Under Linux, you can use the “nmblookup” command for this purpose, provided the
“SAMBA” package has been installed:
[dvl@cobalt ~ 2] $. nmblookup IGWP-XX-XX-XX
Got a positive name query response from 195.226.104.220 (195.226.104.220 )
195.226.104.220 ip400-XX-XX-XX<00>
[dvl@cobalt ~ 3] $.
Complete the definition of interface parameters using the web browser as follows:
6 Start your web browser and go to the address http://ipaddr.
7 Log on to the VoIP Gateway web page. Default, the user name is “admin” and the
password is “changeme”.
8 Change the user name and password immediately to prevent unauthorised access
(see section17.3.1 Change Password and give the VoIP Gateway a Name on page
119).
9 Set the DHCP Mode to “client”, see section Set IP Address on page 120.
22.2 Setting the IP-interface parameters without DHCP
If your network does not have a DHCP server you need to set an static IP address. Ask your
network administrator which IP address and subnet mask you can use for the VoIP
Gateway, as well as whether you are able to use a default gateway, and if so, which one.
1 You have to deactivate the DHCP client built into the VoIP Gateway and activate the
built-in DHCP server. Both are done by pressing the Reset button briefly after a cold
restart.
Name Type Status
---------------------------------------------------------------------------------------------
IGWP-XX-XX-XX<00> UNIQUE Registered
195-226-104-217<00> UNIQUE Registered
MAC address = 00-90-33-XX-XX-XX
Tip: The IP address cannot be displayed with nbtstat if your NetBIOS environment is
configured exclusively to resolve names via WINS.
Consult your network administrator to configure the NetBIOS name resolution
appropriately, if the nbtstat command is unable to find the VoIP Gateway.
Tip: The installation can be concluded using your Web Browser or, using command
lines with the help of Telnet. In this manual we describe the procedure using the
Web Browser, which is usually the most convenient one for common application
scenarios.