Specifications

TD 92326GB
2009-03-10 / Ver. E
Installation and Operation Manual
VoIP Gateway
8
12 Add users. See 11.4.5 Register a New Subscriber on page 78.
13 Calls to non-configured users are usually rejected in the PBX Application. To handle
these calls a gateway object has to be created. This is the formerly automatically
created “EXTERN” object. See an example in 11.4.4 Set up a Gateway Object to
handle External Extensions on page 76.
14 Set up the interface configured above, to register to the PBX Application.
Register a name, for example “Unknown_numbers”. See the example in 17.4.2
Activate the PBX Application in the VoIP Gateway on page 123.
Checkpoint: Select PBX > Objects and check that the VoIP interface is registered to
the _EXTERN_ object in the PBX Application with the correct IP address.
(127.0.0.1 if locally registered, else the IP address of the primary VoIP Gateway.)
15 Configure the call routing. See 12.5 Routes – Configuration on page 94.
Here you specify which terminal equipment is to be reached, under which number.