Specifications

TD 92326GB
2009-03-10 / Ver. E
Installation and Operation Manual
VoIP Gateway
131
1 Create a PBX object in the master PBX Application in VoIP Gateway 1.
Figure 120. Create PBX object
Set up a the slave PBX Application in VoIP Gateway 2...n as follows:
2 Select PBX > General and set PBX mode to “Slave”.
Figure 121. Set up a Slave PBX Application
3 Enter the IP address of the PBX to be used as master in the Slave PBX area.
4 Enter the IP address of an alternative master PBX in the Slave PBX area, if available.
5 Enter the respective password of the location definition which you have created in
the master PBX Application for this PBX object definition under Password.
Proceed as follows to assign a PBX to a user:
6 Set up a new subscriber or click on the name of the desired user in the Objects list.
7 Select the location of your choice in the PBX field.