Specifications

TD 92326GB
2009-03-10 / Ver. E
Installation and Operation Manual
VoIP Gateway
113
15.2.6 Ping
It is often necessary to have a ping command issued for test purposes by the VoIP
Gateways.
1 Select Diagnostics > Ping.
Figure 96. Ping command
2 Any IP address can be entered in the field.
3 Click “OK”.
The ping command is executed on the connected VoIP Gateway. The results are in turn
displayed in the same window.
15.2.7 Traceroute
The Traceroute tool allows you to see how packets travel in the IP network. It shows the
path taken by packets between this device and any other given remote host (IP address).
You get an ordered list of hosts (IP addresses) with the measured round trip time.
1 Select Diagnostics > Traceroute.
2 Enter the IP address to remote host.
15.2.8 CF
Note: Not supported by Ascom.
Depending on device, this menu shows you whether a CF (Compact Flash) card is being
used or not. Please note that the VoIP Gateway supports the FAT32 format only.