Specifications

TD 92326GB
2009-03-10 / Ver. E
Installation and Operation Manual
VoIP Gateway
106
3 Click “Upload”.
14.4 Upload Firmware to DRAM
Note: Not supported by Ascom.
This function allows you to upload a new firmware version into the DRAM of the VoIP
device. The new firmware is started immediately after upload. The firmware loaded to
DRAM is active until the next reset, powercycle or trap. This function can be used to test
new firmware.
1 Select Upload > DRAM.
Figure 89. Upload new firmware version to the DRAM
2 Enter the path and file name of the firmware file to be loaded or click “Browse”.
3 Click “Upload”.
Figure 97.