Specifications

TD 92326GB
2009-03-10 / Ver. E
Installation and Operation Manual
VoIP Gateway
105
1 Select Upload > Firmware.
Figure 87. Upload new firmware version
2 Enter the path and file name of the firmware file to be loaded or click “Browse”.
3 Click “Upload”.
14.3 Upload New Boot Code File
This function allows you to upload a new version of boot code in your VoIP Gateway. New
versions of boot code can be obtained from your dealer.
You will be told not to interrupt the loading process under any circumstances whilst
loading the new boot code.
IMPORTANT: If the “Ready” LED flashes, when downloading, this process may not be
interrupted. Otherwise, your VoIP Gateway may be damaged.
If the loading process is nevertheless interrupted, do not on any account switch your VoIP
Gateway off. Repeat the procedure again, once you have eliminated the problem.
Note: If the new bootcode is 141 or older it will not be immediately activated. You have to
switch your VoIP Gateway off and then back on again to activate the new version.
Look in the documents supplied with the new versions to find out whether new protocol
firmware also needs to be loaded.
1 Select Upload > Boot.
Figure 88. Upload new version of the boot code file
2 Enter the path and file name of the boot code file to be loaded or click “Browse”.