Specifications

TD 92326GB
2009-03-10 / Ver. E
Installation and Operation Manual
VoIP Gateway
97
4 Under “Number in” define the number type and –prefix that you wish to have
replaced. The number type is denoted using the abbreviation from the “Number
types” table on previous page.
5 Define the substitution under “Number out”.
6 By using 'Set Presentation Restricted', CLIR (Calling Line Identification Restricted)
can be activated. With 'Clear Presentation Restricted' CLIR is deactivated. This is a
more convenient way to configure CLIR manipulation then using 'R' in Number-In
or Number-Out. If 'Clear Presentation Restricted' is activated the map matches only
to calls with the presentation restricted set. Together with the 'Verify CGPN' flag at
the route this can be used to route calls with CLIR differently.
7 The Screening Indicator (the right most drop-down list) of the Calling Party Number
can be set to 'User provided', 'User provided and verified', 'User provided verify
failed' and 'Network provided'. Only used to solve compatibility issues
8 Click “OK”.
Note: All call numbers within the VoIP Gateway are always processed in “unknown”
format. That is why the result of a number replacement for incoming calls, always is of the
type “unknown” and the call number type of outgoing calls to be replaced is likewise
always “unknown”. Accordingly, you cannot specify a number type for replacements of
incoming numbers in the “Number out” field and for replacements of outgoing numbers
in the “Number in” field.