User Guide

PRODUCT SHEET: TACTICAL OPENACCESS NODE R
Networking
Network topology Support for meshed network topologies.
Topology changes
Dynamic routing adaptation in response to network
topology changes.
Routing Supports both unicast as well as multicast routing.
Routing path selection
Best path selection across different network domains
(i.e. tactical radio network, LAN, military backbone).
Data Features
IP IPv4
DNS
Built-in Domain Name Server for IP-address-to-name
and name-to-IP-address translation.
DHCP
Built-in Dynamic Host Configuration Protocol server for
IP address assignment.
Radio Features
Tactical radio network
topology
Optimised network topology management for tactical
radio networks. No limitation on the type of radio
network topology.
Radio Connection
4x VHF / HF tactical radio (e.g. PR4G transparent data
interface and remote control interface supported)
ARQ Per-link ARQ across radio networks
Management Features
Management
Remote configuration and monitoring based on SNMP
and Network Management Application (NMA).
Configuration storage
Storage of multiple configuration profiles. Configura-
tion changes are possible without reset or reboot.
Configurations can be backed up locally or remotely.
Update management Supports remote software updates.
Environmental Conditions
Temperature
Operation: -20..+55°C, MIL-STD-810F, 502.4, procedure
II, MIL-STD-810F, 501.4, procedure II
Storage: -30..+60°C, MIL-STD-810F, 502.4, procedure I,
MIL-STD-810F, 501.4, procedure I
Cooling
Cooling possible without external air exchange
If required, an internal fan activates the airflow and
optimises the cooling.
Humidity
MIL-STD-810F, 507.3, proc. I, cycle 3 (95%RH) with
closed connector shields.
Waterproof
MIL-STD-810F, 506.3, proc. II (dripping-water) with
closed connector shields.
Vibrations
MIL-STD-810F, method 514.4-4 AIII modified (depend-
ing on axis: 1…6.5g RMS, random on random 5 - 500Hz,
8Min/phase, total 40Min/axis, mounted in swing
frame)
Shock
MIL-STD-810F, method 516.5, procedure I, 30g 11 ms
sawtooth, mounted in swing frame
EMC
Emissions
MIL-STD-461E (CE102, 10kHz – 10MHz, figure CE102-1
on 24 VDC; RE102, 10 kHz – 1GHz, figure RE102-4 /
army)
Immunity
MIL-STD-461E (CS114: figure CS114-1 on all cables,
10kHz-1MHz curve #3, 1MHz-30MHz curve #4, 30MHz-
200MHz curve #4; RS103: 30MHz – 1GHz 20V/m,
30MHz–18GHz 50 V/m).
ESD air discharge with 8kV, contact discharge with 4kV
according to IEC 61000-4-2.
Burst 1 kV according to IEC 61000-4-4 coupling gripper
on the cable.Burst 1 kV according to IEC 61000-4-4
direct coupling on 24V line.
Surge on 24VDC: according to EN 61000-6-2 (Immunity,
Industry, Table 3 dc power port); line-to-earth +/- 0.5kV
1.2 / 50 us (8/20), 12 Ohm; line-to-line: +/- 0.5kV 1.2 /
50 us (8/20), 2 Ohm.
Mechanical
Size (LxHxD)/mm 279x105x215 (without connectors)
Weight 6kg
Connectors
Circular interface and power supply plugs, mounted on
front side
Power
Input voltage 24VDC (18-33VDC)
Power consumption 20W nominal, 30W maximal
Power autonomy
An internal lithium-polymer storage battery 24V /
1.5Ah provides power for 5 minutes.
Available Interfaces
Remote relay Relay I/O control over IP
Serial lines
6 x asynchronous port 16C550 compatible
4 x synchronous port
Switched Ethernet 2 x 10Base-T / 100Base-TX
Service interface 1xUSB 2.0, 1xRS-232
User Interfaces
Display 2-digit process display
Status PC (HD and LAN activity)
Operational displays
radio control, supply power, fans, temperature, storage
battery
Switches / keys On/Off Reset Test
Technical Specification