Myco 3 quick ref guide

ascom

Battery Replacement

The handset has a rechargeable battery that can be charged separately from the

handset. To charge it, use the Battery Charging Rack or the Desktop Charger.

If you want to charge the handset, do it either with a Handset Charging Rack,

Desktop Charger or a Micro USB cable.

With the Desktop Charger you can charge the handset together with one extra

battery.

Charging Methods

Slide the battery cover lock to the right to release the battery.

While pressing and holding the upper part of the clip, lift the battery and pull it

out.

Press the clip once agin. Insert a fully charged or new battery and press it in.

Slightly press on the battery and slide the battery cover lock to the left to lock

the battery.

The battery has been properly inserted if none of the battery parts is

detached.

Desktop Charger

Place the handset in the charging slot for handsets. Push the handset into

the charger to fully insert it. If the handset is correctly inserted, the charging

screen appears showing the battery charge level and the owner ID.

When the green check mark icon appears on the screen and the LED turns

green, the battery is fully charged.

Use the Desktop Charger to charge only the handset or the handset together with

one extra battery.

Handset Charging

Handset Disconnection

Tilt the handset towards you and then lift the handset upwards to remove it from

the charger.

Charging