User's Manual

TD 93066EN
2 April 2015 / Ver. A
User Manual
Ascom Myco SH1 Wi-Fi and Cellular Smartphone
28
7. Alert View
The Alert priority is also shown by use of colors, as follows:
• The Color-coded LED priority b
eacon always show the priority color of incoming alerts.
• The Alert-Centric view, showa a bar to the left of e
ach alert in the priority color.
Priority color: Priority: Used for event: Indications (if enabled):
Red Crisis "Code Blue" crisis alert Top display notification, red flashing
LED priorit
y beacon, sound, vibrator
IMPORTANT: All indications are always
en
abled, and cannot be turned off
Red High High priority alert Top display notification, red flashing
LED priorit
y beacon, sound, vibrator
IMPORTANT: All indications are always
en
abled, and cannot be turned off
Yellow Medium Medium priority alert Top display notification, yellow
fl
ashing LED priority beacon, sound.
vibrator
Cyan Low Low priority alert Top display notification, fixed cyan LED
priori
ty beacon, sound, vibrator
White None Non-prioritized, or
infor
mation only
Top display notification, fixed white
LED priority beacon, sound, vibrator
7.5.2 Alert Type Icons
Alerts are indicated with different ic
ons in the Top display and Alert view depending on type
as follows:
Alert type icon Indicates
System warnings
No network (no alerts)
Logged out
Calls
Alerts
a
Conversations
a
System dependent.
7.5.3 Alert Sort Color
NOTE: Sort color use is dependant on conf
iguration and can differ between system setups.
IMPORTANT: There is no priority handling for s
ort colors, and for informational use only
Different type of alerts can be differentiat
ed by the use of sort color as follows:
NOTE: The sort color completely stand-alone and not connected to the priorit
y of the alert.