User's Manual

TD 93066EN
2 April 2015 / Ver. A
User Manual
Ascom Myco SH1 Wi-Fi and Cellular Smartphone
27
7. Alert View
Alert notifications in the Top display will remain, until they are acted upon. After one minute
of inactivity the Top display will turn off, in order to save battery capacity.
The icons used for alerts are the same, u
sed in the main display, refer to 7.5.2 Alert Type
Icons on page 28.
Alert priority beacon (Ändra till heading
2 när alla kommentarer är rättade)
When the Front display is in sleep mode, the alert
type is shown with different colors on the
Alert priority beacon. The Alert priority beacon flashes for 10 seconds and then turned off,
in order to save battery capacity.
7.3 Top priority bar
The alert of highest priority is shown in the Top priority bar. If there are several active alerts
with the same priority, the oldest is shown.
By tapping the Top priority bar a detailed view of the alert with a
cknowledge options is
shown. By handling the alert, the next alert in line (oldest for highest priority) is shown in
the Top priority bar.
7.4 Alert Classification
NOTE: An Alert is associated with colors (a priority color, or a sort color, type, and icon).
Alerts are prioritized depending of priority. A high priority alert always overrides a
lower priority alert.
7.5 Alert Prioritization
Alerts are prioritized depending on their type in the order shown below (from high (1) to
low (4) priority):
IMPORTANT: A "Code Blue" (crisis), or high priority aler
t is always prioritized as high priority
(1), and always overrides any system warning, or phone call!
High priority 1 "Code Blue" (crisis) alert/high priority al
ert/system warning
2 Phone call
3 (Medium/Low) Alert
IMPORTANT: A "Code Blue" (crisis) alert, or high priority alert is
always p
rioritized as (1).
Low priority 4 Conversation
7.5.1 Alert Priority Color
NOTE: The Alert Priority Colors foll
ow the MDD standards and cannot be altered, however in
some configurations the alert sort color can be shown instead of alert priority color.