User's Manual

TD 93066EN
2 June 2017 / Ver. PG5
User Manual
Ascom Myco Wi-Fi and Cellular Smartphone
58
11. Notifications
11. Notifications
New messages, phone calls, alerts and status information are all indicated by notifications
from the handset.
This chapter includes the following sections:
• 11.1 Sound and Vibration on page 58
• 11.2 Color-Coded LED Signals on page 58
• 11.3 Top Display Notification on page 59
• 11.4 Lock Screen Notifications on page 59
• 11.5 Status Bar on page 61
• 11.6 Notifications on page 61
• 11.7 Notification Drawer on page 63
• 11.8 Icons Used for Notification on page 64
11.1 Sound and Vibration
Incoming alerts and messages, in addition to various status notifications, can be indicated
by sound and vibration.
11.2 Color-Coded LED Signals
The LED priority beacon in front of the top display is used to indicate the priority level, or the
category, of incoming alerts. When a high priority alert also has a category color, the LED
alternates between red and category color flashes.
The LED is also used to indicate incoming text messages and phone calls, and to show the
battery and charging status.
Figure 27. LED and top display notifications.
The following colors can be shown in the LED priority beacon:
NOTE: The colors used may differ depending on system configuration.
Color Light Pattern Type Level
Red Flashing, then steady Priority Crisis/high
Yellow Flashing, then steady Priority Medium
Cyan Flashing, then steady Priority Low