User's Manual

TD 93066EN
2 June 2017 / Ver. PG5
User Manual
Ascom Myco Wi-Fi and Cellular Smartphone
47
7. Alerts
Figure 22. The number of pending alerts shown in the top bar.
The top bar can also be used to show availability (as in the example below). To enable this,
instead of alert information, the value Login > Enable user availability status needs to be
changed to Yes in the Device Manager (default: No).
Figure 23. Availability status in the top bar
7.2.5 Notification
When an alert is received, it may appear on screen as a notification, refer to 11.6
Notifications on page 61.
7.3 Alert Classification
The following can be used to classify alerts:
• 7.3.1 Priority Level and Color
- Only used for alerts from patient monitoring systems. Each priority level is indicated by
a specific color.
• 7.3.2 Category Color
- Categories can be used to label alerts with a color, for example to show which patient
group, the alert is coming from.
• 7.3.3 Alert Type Icons
- Indicates the alert type, for example a nurse call, or a lab result notification.
7.3.1 Priority Level and Color
Alerts from patient monitoring systems are prioritized depending on their priority level, in
the order shown in the following table:
NOTE: A "Code Blue" (crisis) alert is always prioritized as high priority (1), and always
overrides any system warning, or phone call.
High priority 1 "Code Blue" (crisis) alert/high priority alert/system warning
2Phone call
3 (Medium/Low) Alert
IMPORTANT: A "Code Blue" (crisis) alert, or a high priority alert, is
always prioritized as (1).
Low priority 4 Conversation message