User's Manual

Safety Instructions Ascom Myco
English 7
Quick Start
Insert the Micro-SIM (for the Cellular variant only)
1. The SIM card slot is located under the clip. Press on the clip to
open it fully, and insert the Micro-SIM in the SIM card slot, in
the direction as shown on the label.
TIP: If needed, use a pair of tweezers to hold it, then push it
into the slot.
Get the Ascom Myco started
2. Close the battery cover, and lock it. The handset starts within
seconds if the battery is charged.
3. If the handset does not start, charge the battery, and then
long press (press and hold) the Power button (on the
handset’s upper left side) to switch handset On.
4. When the handset is switched On, follow instructions from
your handset administrator, or if you are the administrator,
continue with the Easy Deployment procedure described in the
Configuration Manual (or the User Manual).
Please find the complete Ascom Myco User Manual online at:
http://www.ascom.com/MycoUserDoc
IMPORTANT: The battery is not fully charged from the factory. We
recommend you to allow the handset to charge fully before use.