User's Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Descriptions
- 3 Operation
- 3.1 Basic Operation
- 3.1.1 Call List
- 3.1.2 Make a Call
- 3.1.3 Answer a Call
- 3.1.4 End a Call
- 3.1.5 Transfer a Call
- 3.1.6 Turn Off Alert Signals at an incoming Call
- 3.1.7 Turn the Mute Mode during a Call Off/On
- 3.1.8 Loudspeaking Function
- 3.1.9 Increase/Decrease the Speaker Volume during a Call
- 3.1.10 Turn Audible Signals On/Off
- 3.1.11 Lock/Unlock the Keypad
- 3.1.12 Lock/Unlock the Handset
- 3.1.13 Switch the Handset On
- 3.2 Messaging
- 3.3 SMS (Short Message Service)
- 3.4 Interactive Messaging
- 3.5 Mobile Data
- 3.6 Conference Call
- 3.7 Push-to-talk
- 3.8 Alarm Operation
- 3.9 Automatic Call after an Alarm
- 3.1 Basic Operation
- 4 Navigate the Menu
- 5 Menu Tree
- 6 Menu Operation
- 6.1 Messages
- 6.2 Contacts
- 6.2.1 Find an Entry in the Local Phonebook
- 6.2.2 View an Entry in the Local Phonebook
- 6.2.3 Add an Entry to the Local Phonebook
- 6.2.4 Delete an Entry in the Local Phonebook
- 6.2.5 Edit an Entry in the Local Phonebook
- 6.2.6 Find an Entry in the Central Phonebook
- 6.2.7 Save a Number from the Call List to the Local Phonebook
- 6.2.8 Delete a Number in the Call List
- 6.2.9 Delete All Numbers in the Call List
- 6.3 Modes
- 6.4 Services
- 6.5 Settings
- 6.5.1 Change the Volume
- 6.5.2 Change the Ring Signal
- 6.5.3 Key Beep On/Off
- 6.5.4 Vibrator On/Off
- 6.5.5 Deactivate/Activate No-movement alarm
- 6.5.6 Deactivate/Activate Man-down alarm
- 6.5.7 Deactivate/Activate Pull-cord alarm
- 6.5.8 Edit a Soft key
- 6.5.9 Edit a Hot key
- 6.5.10 Select Language
- 6.5.11 Change Text Size
- 6.5.12 Lock the Handset Manually
- 6.5.13 Change the Lock Code
- 6.5.14 Clock Settings
- 6.5.15 Turn On/Off Automatic Keypad Lock
- 6.5.16 Enable/Disable Quick Answer
- 6.5.17 Set New Messages to be Displayed Upside down
- 6.5.18 Set Owner ID
- 6.5.19 Select PBX System
- 6.6 Additional Information
- 7 Advanced Functions
- 8 Operation Notice
- 9 Maintenance
- 10 Trouble Shooting
- Appendix A: 9d24 Mkll Functionality with a 9d23 SIM
- Index 92333GB
PRELIMINARY
TD 92333GB
2006-03-20/ Ver. PA8
User Manual
9d24 Mkll Cordless Telephone
37
Tip: There is a quick access code you can use to enter the upgrade mode directly
without using the menu. The quick access code is *#87#.
2 Go to the upgrade service on our Extranet and enter the IPEI number and the access
code for the handset. The IPEI number is shown in your handset when entering the
upgrade mode. The access code is included in the upgrade package.
3 When you have received the licence code, enter the licence code in the upgrade
mode on your handset and press "Ok". A message is shown in the display telling
you if your handset has been upgraded or not. Additional functions have now been
added to your handset. The functions can be used immediately without having to
restart the handset.
4 The upgrade package contains a new top front for the handset. To replace the
existing top front on the handset with the new one, do as follows:
Release the two scews at top on the handset and lift off the top front, see
figure 5