User's Manual

PRELIMINARY
TD 92333GB
2006-03-20/ Ver. PA8
User Manual
9d24 Mkll Cordless Telephone
32
6.5.7 Deactivate/Activate Pull-cord alarm
Select the Settings tab and press the Navigation key (down) to enter Settings. Mark
“Alarm settings” and press Navigation key (right). Mark “Pull-cord” and press “Change”;
the Pull-cord checkbox is marked/unmarked.
6.5.8 Edit a Soft key
Soft key
Left:Open >
Middle: M 1h
Right: SMS
021
Select the Settings tab and press Navigation key (down) to enter Settings. Mark “Soft key”
and press Navigation key (right). Mark the one you want to edit and press Navigation key
(right). Press “Edit”; “Name;_” is displayed. Enter a name of maximum seven characters.
Press “Save”. “Changes saved” is shown and the handset automatically returns to the
soft key. Press Navigation key (down); “Function:......” is marked. Press “Change” to enter
functions.
Use Navigation key (down) and choose the function you want the Soft key to have.
Functions:
Data send: Press “Select”. Enter data if you want to predefine it, or leave it out if
you want to enter data after pressing the Soft key, press “Save”.
Data with prefix: Press “Select”. Enter prefix and press “Save”.
Phone call: Press “Select”. Enter phone number and press “Save”. It is possible to
turn on/off the tone sender in the entered number by making a long
press on the *-key. Tone sender on will be indicated with a “T” in the
number and off with “-”. A pause can be added by making a long
press on the #-key. The pause is indicated with a “P” in the number.
Short-cut: Press “Select”. Assign the short-cut; Absent, Local phonebook, Central
phonebook, Services, Switch off, No-movement alarm, Man-down
alarm, Pull-cord alarm, Edit alarm data, Change system, Demo Mess 1,
Demo Mess 2, or RSSI. Press “Select”.
SMS: Press “Select”. When “SMS address” is shown you can leave it blank,
or you can predefine a destination address; press “Ok”.
Change mode: Press “Select”. Mark the mode that should be changed to and press
“Select”.
Not used: Press “Select”. “Not used” will be indicated in the Soft key list.
The name of the selected function is shown. The handset will automatically return to the
soft key.
6.5.9 Edit a Hot key
Select the Settings tab and press Navigation key (down) to enter Settings. Mark “Hot key”
and press Navigation key (right). Mark the one you want to edit (0, 1, 2,......9) and press
Navigation key (right). “Name:” is marked; press “Edit”. Enter a name of maximum
sixteen characters. Press “Save”. “Changes saved” is shown and the handset