User's Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Descriptions
- 3 Operation
- 3.1 Basic Operation
- 3.1.1 Call List
- 3.1.2 Make a Call
- 3.1.3 Answer a Call
- 3.1.4 End a Call
- 3.1.5 Transfer a Call
- 3.1.6 Turn Off Alert Signals at an incoming Call
- 3.1.7 Turn the Mute Mode during a Call Off/On
- 3.1.8 Loudspeaking Function
- 3.1.9 Increase/Decrease the Speaker Volume during a Call
- 3.1.10 Turn Audible Signals On/Off
- 3.1.11 Lock/Unlock the Keypad
- 3.1.12 Lock/Unlock the Handset
- 3.1.13 Switch the Handset On
- 3.2 Messaging
- 3.3 SMS (Short Message Service)
- 3.4 Interactive Messaging
- 3.5 Mobile Data
- 3.6 Conference Call
- 3.7 Push-to-talk
- 3.8 Alarm Operation
- 3.9 Automatic Call after an Alarm
- 3.1 Basic Operation
- 4 Navigate the Menu
- 5 Menu Tree
- 6 Menu Operation
- 6.1 Messages
- 6.2 Contacts
- 6.2.1 Find an Entry in the Local Phonebook
- 6.2.2 View an Entry in the Local Phonebook
- 6.2.3 Add an Entry to the Local Phonebook
- 6.2.4 Delete an Entry in the Local Phonebook
- 6.2.5 Edit an Entry in the Local Phonebook
- 6.2.6 Find an Entry in the Central Phonebook
- 6.2.7 Save a Number from the Call List to the Local Phonebook
- 6.2.8 Delete a Number in the Call List
- 6.2.9 Delete All Numbers in the Call List
- 6.3 Modes
- 6.4 Services
- 6.5 Settings
- 6.5.1 Change the Volume
- 6.5.2 Change the Ring Signal
- 6.5.3 Key Beep On/Off
- 6.5.4 Vibrator On/Off
- 6.5.5 Deactivate/Activate No-movement alarm
- 6.5.6 Deactivate/Activate Man-down alarm
- 6.5.7 Deactivate/Activate Pull-cord alarm
- 6.5.8 Edit a Soft key
- 6.5.9 Edit a Hot key
- 6.5.10 Select Language
- 6.5.11 Change Text Size
- 6.5.12 Lock the Handset Manually
- 6.5.13 Change the Lock Code
- 6.5.14 Clock Settings
- 6.5.15 Turn On/Off Automatic Keypad Lock
- 6.5.16 Enable/Disable Quick Answer
- 6.5.17 Set New Messages to be Displayed Upside down
- 6.5.18 Set Owner ID
- 6.5.19 Select PBX System
- 6.6 Additional Information
- 7 Advanced Functions
- 8 Operation Notice
- 9 Maintenance
- 10 Trouble Shooting
- Appendix A: 9d24 Mkll Functionality with a 9d23 SIM
- Index 92333GB
PRELIMINARY
TD 92333GB
2006-03-20/ Ver. PA8
User Manual
9d24 Mkll Cordless Telephone
31
• In General you can change following settings: Language, Text size, Clock, Auto key
lock, Quick answer, New message rotated and Owner ID.
• In System you can Select system, Register a new system* and get information about
the handset.
* See
7.1 System Handling on page 35.
6.5.1 Change the Volume
Select the Settings tab and press the Navigation key (down) to enter Settings. Mark “Alert
signals” and press Navigation key (right). Mark “Volume:” and press Navigation key
(right). Use Navigation key (down) and choose the volume you want. You have six
available alternatives; Level 1 to 5, or Silent.
If you want to hear the volume level during the changing, press “Play”. The handset will
play until you press “Stop”, “Select”, or Navigation key (left).
Activate your choice by pressing “Select”; the selected volume is shown. The handset will
automatically return to the Alert signals list and the volume is marked.
6.5.2 Change the Ring Signal
Select the Settings tab and press the Navigation key (down) to enter Settings. Mark “Alert
signals” and press Navigation key (right). Mark “Ring signals” and press Navigation key
(right). You can change the ring signal for Internal call, External call, or Call back. Use
Navigation key (down) and choose the ring signal you want to change by pressing
Navigation key (right). Use Navigation key (down) and choose the signal you want.
Available alternatives are; Beep, Low, Medium, High and Mixed.
If you want to hear the new signal, press “Play”. The marked signal is played until you
press “Stop”, “Select”, or Navigation key (left).
Activate your choice by pressing “Select”; the selected Ring signal is shown. The handset
will automatically return to the Ring signals list and the changed Ring signal is marked.
6.5.3 Key Beep On/Off
Select the Settings tab and press the Navigation key (down) to enter Settings. Mark “Alert
signals” and press Navigation key (right). Mark “Key beep” and press “Change”; the Key
beep checkbox is marked/unmarked.
6.5.4 Vibrator On/Off
Select the Settings tab and press the Navigation key (down) to enter Settings. Mark “Alert
signals” and press Navigation key (right). Mark “Vibrator” and press “Change”; the
Vibrator checkbox is marked/unmarked.
6.5.5 Deactivate/Activate No-movement alarm
Select the Settings tab and press the Navigation key (down) to enter Settings. Mark
“Alarm settings” and press Navigation key (right). Mark “No-movement” and press
“Change”; the No-movement checkbox is marked/unmarked.
6.5.6 Deactivate/Activate Man-down alarm
Select the Settings tab and press the Navigation key (down) to enter Settings. Mark
“Alarm settings” and press Navigation key (right). Mark “Man-down” and press
“Change”; the Man-down checkbox is marked/unmarked.