User's Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Descriptions
- 3 Operation
- 3.1 Basic Operation
- 3.1.1 Call List
- 3.1.2 Make a Call
- 3.1.3 Answer a Call
- 3.1.4 End a Call
- 3.1.5 Transfer a Call
- 3.1.6 Turn Off Alert Signals at an incoming Call
- 3.1.7 Turn the Mute Mode during a Call Off/On
- 3.1.8 Loudspeaking Function
- 3.1.9 Increase/Decrease the Speaker Volume during a Call
- 3.1.10 Turn Audible Signals On/Off
- 3.1.11 Lock/Unlock the Keypad
- 3.1.12 Lock/Unlock the Handset
- 3.1.13 Switch the Handset On
- 3.2 Messaging
- 3.3 SMS (Short Message Service)
- 3.4 Interactive Messaging
- 3.5 Mobile Data
- 3.6 Conference Call
- 3.7 Push-to-talk
- 3.8 Alarm Operation
- 3.9 Automatic Call after an Alarm
- 3.1 Basic Operation
- 4 Navigate the Menu
- 5 Menu Tree
- 6 Menu Operation
- 6.1 Messages
- 6.2 Contacts
- 6.2.1 Find an Entry in the Local Phonebook
- 6.2.2 View an Entry in the Local Phonebook
- 6.2.3 Add an Entry to the Local Phonebook
- 6.2.4 Delete an Entry in the Local Phonebook
- 6.2.5 Edit an Entry in the Local Phonebook
- 6.2.6 Find an Entry in the Central Phonebook
- 6.2.7 Save a Number from the Call List to the Local Phonebook
- 6.2.8 Delete a Number in the Call List
- 6.2.9 Delete All Numbers in the Call List
- 6.3 Modes
- 6.4 Services
- 6.5 Settings
- 6.5.1 Change the Volume
- 6.5.2 Change the Ring Signal
- 6.5.3 Key Beep On/Off
- 6.5.4 Vibrator On/Off
- 6.5.5 Deactivate/Activate No-movement alarm
- 6.5.6 Deactivate/Activate Man-down alarm
- 6.5.7 Deactivate/Activate Pull-cord alarm
- 6.5.8 Edit a Soft key
- 6.5.9 Edit a Hot key
- 6.5.10 Select Language
- 6.5.11 Change Text Size
- 6.5.12 Lock the Handset Manually
- 6.5.13 Change the Lock Code
- 6.5.14 Clock Settings
- 6.5.15 Turn On/Off Automatic Keypad Lock
- 6.5.16 Enable/Disable Quick Answer
- 6.5.17 Set New Messages to be Displayed Upside down
- 6.5.18 Set Owner ID
- 6.5.19 Select PBX System
- 6.6 Additional Information
- 7 Advanced Functions
- 8 Operation Notice
- 9 Maintenance
- 10 Trouble Shooting
- Appendix A: 9d24 Mkll Functionality with a 9d23 SIM
- Index 92333GB
PRELIMINARY
TD 92333GB
2006-03-20/ Ver. PA8
User Manual
9d24 Mkll Cordless Telephone
7
2.5.2 Menu key
The Menu key is used for entering the Menu.
2.5.3 Call Key
The call key is used for connecting/disconnecting calls.
2.5.4 Soft keys
Soft keys
Max. seven characters can be
used for naming a Soft key.
SMS Door Off
005
The three Soft keys are located just beneath the display and the function of each Soft key
is indicated by text in the display just above the keys.
In stand-by mode the Soft keys can be used for specific functions defined by the user of
the handset. The function can be to dial a specific telephone number, sending mobile
data, a short-cut to the menu, or sending SMS.
When navigating in menu mode the Soft keys are used for different choices in the menu.
2.5.5 Hot keys
Any key “0” - “9” can be set to a Hot key. Any Hot key can be programmed to give access
to frequently used functions such as dialing a specific telephone number, sending mobile
data, a short-cut to the menu, or sending SMS. Note that the possibility to define a Hot
key can be locked by your system administrator.
2.5.6 Volume Button
The Volume button is used for increasing/decreasing the loudspeaker volume.
2.5.7 Mute Button
The Mute button is used for silencing the audible signals in stand-by mode, silencing the
ring signal at an incoming call and also to turn off/on the microphone during a call.
2.5.8 Alarm Button
The red Alarm button is used for sending alarms and for testing the alarm function (test
alarm).