User Manual

TD 92288GB
2005-09-03/ Ver. B
User Manual
OfficeM Cordless Telephone
3
Do not attempt to disassemble the telephone. Doing so will void the warranty. Service
should be performed only by authorized service centers. The OfficeM cordless telephone
does not contain consumer serviceable components.
Do not allow children to play with the product packaging material. Product packaging
material is often small and may present a choking hazard.
Do not allow children to play with your telephone. It is not a toy. Children could hurt
themselves or others. Children could also damage the telephone.
2.1 Chemical Resistance
The alpha and numeric characters printed on the exterior of the OfficeM Cordless
telephone have been tested and found resistant to chipping, fading or wearing off when
the telephone is treated with common cleaners and disinfectants or perspiration. The
following chemicals have shown no harmful effect:
3% Hydrochloric Acid
M-alcohol (70% Methylated Ethanol)
60% Chlorhexidin 0.5mg/ml
Important: Read this information before using your OfficeM Cordless telephone.
The cordless telephone is one of the most innovative products ever developed. With it, you
can maintain connectivity to traditional telephone services while remaining mobile around
the work environment. For the safe and efficient operation of your telephone, observe the
guidelines in this manual. Your cordless telephone is a radio transmitter and receiver.
When it is on it receives and sends out radio frequency (RF) energy. The telephone
operates in the frequency range of 1921.5 to 1928.5 MHz and employs commonly used
modulation techniques.
Note: Acetone can be damaging to the plastic casing of the cordless telephone and
should not be used.
2.2 Exposure to Radio Frequency Signals
The OfficeM Cordless telephone is a radio transmitter and receiver. It is designed and
manufactured not to exceed the emission limit for exposure to radio frequency (RF) energy
set by the Federal Communications Commission (FCC) of the U.S. Government and
Canada. These limits are part of comprehensive guidelines and established permitted
levels of RF energy for the general population. These guidelines are based on the safety
standards previously set by both U.S. and international standards bodies. These standards
include a substantial safety margin designed to assure the safety of all persons, regardless
of age and health. The exposure standards for wireless mobile telephones employs a unit
of measure known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC
and Canada is 1.6W/kg averaged over one gram of tissue.
Tests for SAR are conducted using standard operating positions specified by the FCC with
the telephone transmitting at its highest certified power level in all tested frequency
bands. Although the SAR is determined at the highest certified power level, the actual SAR
level of the telephone while operating can be well below the maximum value. This is
because the telephone is designed to operate at multiple power levels.
Before a telephone model is available for sale to the public, it must be tested and certified
to the FCC that it does not exceed the limit established by government-adopted
requirement for safe exposure. The tests are performed in positions and locations (for
example, at the ear and worn on the body) as required by the FCC for each model. The