User Guide

Installation and First-Time Operation

Putting Your Phone into Operation

Logging your phone on

Before you can log on your phone, the SIM card has to be correctly fitted inside the battery compartment

and your system administrator has to prepare the system.

Stored on the SIM card is the logon data and your phone's local settings in the system.

To replace a phone, all you have to do is fit the SIM card into the new phone.

Inserting the SIM card

1. Use an appropriate tool to release the catch on the SIM card

compartment and open up the compartment.

2. Slide the SIM card into place with the printed side facing

downwards.

3. Close the compartment and activate the catch. Warning:

The compartment only clicks into place if the SIM card has been

correctly fitted.

Connecting

the plug-in power adapter

1. Plug the smaller connector into the socket on the underside of the

charging bay.

2. Feed the cable through the strain relief provided.

3. Plug the plug-in power adapter into an available socket outlet.

Inserting the battery

1. Hold the phone with the clip facing downwards and insert the battery.

2. Press the battery and phone firmly together and slide the two locks outwards.

1) Note: Plug designs vary from country to country