User Guide

Personalizing Your Phone
56
Storing a Function under a Key – Function Key
You want to retrieve a frequently used function - for example "call forwarding on no reply" - using a
single keystroke rather than having to enter it by hand.
Each function key is assigned 2 memory locations. With predefined functions, the */# procedure for
activating the function is stored in memory 1 and the */# procedure for deactivating it, in memory 2.
You can store a function under two different keys:
• the Hotkey – accessible at all times via the Hotkey
• the Foxkey itself – accessible only in the idle state
<long> Storing a function under the Foxkey: Press the Foxkey in the idle state and
hold it down for a moment.
Display reads "Number" or "Function".
– or –
To assign a function to a Hotkey: Press the Hotkey.
The display shows "Hotkey 1" and "Hotkey 2"
Press the Hotkey repeatedly until the display shows the Hotkey you want.
Note
You can also scroll through the Hotkeys with the Menu key.
<long> Press the corresponding Foxkey and hold it down a moment.
Display reads "Number" or "Function".
Note
From here on, the operating sequence is the same as for: Assigning to a
Foxkey and assigning to a Hotkey.
v Press the "v" Foxkey repeatedly until the display shows "Function".
OK Press the "OK" Foxkey.
The display shows the first function from the list of functions.
v Press the "v" Foxkey repeatedly until the display shows the function you
want.
Further prompting depends on the function.
Note
Besides the predefined functions you can also define your own function.
For more information, please refer to the section "Formulating Functions".
OK Press the "OK" Foxkey.
The function is stored under the key. Phone in idle state.