User Guide

Personalizing Your Phone
47
Setting the System Parameters on the Cordless Phone
You want to activate or deactivate the illumination, the range beep and/or the system busy beep.
After a key has been pressed, the display illumination persists for 15 seconds.
Repeatedly actuating the keys affects the service life.
The range beep tells you that the connection between your phone and the system is borderline.
The system busy beep tells you that the system is overloaded – you need to wait until the system is
available again.
Press the #-key and hold it down for a moment.
v Press the "v" Foxkey repeatedly until the display shows the system
parameter you want.
OK Press the "OK" Foxkey.
v Use the "v" Foxkey to select "On" or "Off".
OK Press the "OK" Foxkey.
The setting is stored.