User Guide

Using Added Features to Make Efficient Phone Calls
39
Read text messages
Your display shows "New message received" or "Other message received", followed by "Message list".
The Indicator LED is flashing.
The read function is used to retrieve a received message from the memory so you can read it. The first
message received is the first message shown.
Answering or Rejecting a Callback Message
Someone has asked you to call back. You can tell that there is a callback request because the Indicator
LED is lit in the idle state.
The display shows "Call back requiered" and a phone number.
You can either answer or reject the callback request.
Note
By pressing the Info key you can identify the sender of the message before
reading the message itself.
Read Press the "Read" Foxkey.
The message is displayed for 8 seconds. If the message runs over several
lines, the next line will then be displayed automatically.
To show the next line before the 8 seconds have elapsed: Press the Infokey.
Delete To delete the message: Press the "Delete" Foxkey.
The message is deleted; the next message is retrieved from the memory.
Once the last message has been deleted, the phone switches back to the
idle state.
– or –
To end the reading process: Press the C-key.
The phone reverts to the idle state. The message remains stored.
Note
The next message is only retrieved from the memory once you have deleted
a message.
The LED flashes as long as there are still messages in the memory.
Note
By pressing the Info key you can identify the sender of the message before
reading the message itself.
Call To answer the callback request: Press the "Call" Foxkey.
The person is dialled.
– or –
Delete To reject the callback request: Press the "Delete" Foxkey.
The callback request is rejected.