User Guide

6 ascom Office 10 20316549en_ba_a0
Call transfer (switching)
You wish to connect two call partners with one another:
You are making a call:
Brokering
You wish to switch back and forth between two calls:
You are making a call:
Conference
You wish to hold a three-party conference with two other call partners:
You are making a call:
Activating callback if subscriber busy
The subscriber you have called is busy. You can activate a callback.
You have dialled a number and obtained the busy tone:
As soon as the subscriber you called has finished with his call, your tele-
phone will start ringing. If you pick up your handset, your destination
subscriber's phone will also start ringing.
Activating a callback if no reply
The subscriber you have called does not answer your call. You can
activate a callback.
You have dialled a number and obtained the ringing tone:
The call is on hold, the other party hears the hold tone
(
+ Putting a call on hold).
Set up the new connection.
Make your second call.
The call partners are connected with one another.
The call is on hold, the other party hears the hold tone
(
+ Putting a call on hold).
Set up the new connection.
Make your second call.
Switch to the first call.
Switch to the second call.
☛
☛
The call is on hold, the other party hears the hold tone
(
+Putting a call on hold).
Set up the new connection.
Make your second call.
Set up the three-party conference
(Keep pressing the key until you hear the acknowledge-
ment tone).
Callback is now activated.
Callback is now activated.
☛