System Description

TD 93025US
9 May 2019 / Ver. I 21
System Description
teleCARE IP
5.6 System Manager (NISM2)
The teleCARE IP System Manager (NISM2) is an Ascom ELISE application built on the ELISE3 module.
The NISM2 is the tool for centrally managing the teleCARE IP system through a graphical user
interface (GUI). It is used to configure, install, maintain and monitor the system.
Figure 14. teleCARE IP System Manager (NISM2)
The NISM2 contains a Linux based web server which functions as the interface to a 100Base-T
Ethernet LAN. The NISM2 contains a client web application which enables the NISM2 to be managed
from a (remote) client.
The NISM2 is connected to the IP network and stores the configurations for each of the teleCARE IP
Room Controllers that are connected to the IP network. The data stored by the NISM2 can be retrieved
over the IP medium and run inside a web browser on a remote client.
In teleCARE IP installations which include NIRD Room Displays but do not include Ascom Messaging,
the NISM2 is used as the Interactive Messaging server for the room displays.
The NISM2 has two RS232 COM ports (COM1 and COM2) which can be used for connection of a TAP
(or an ESPA) paging system. A licence is required for support of a TAP or an ESPA paging system.
IMPORTANT: For UL 2560 installations, the NISM2 can only be connected to the systems
external 24Vdc power supply (see “System Power” on page 14).