User's Manual

TD 93021US Rev A
10 FEB 2014 / Ver A 118
Installation Guide
teleCARE IP
7.1.2 Preparing Single-Sided Displays Prior to Mounting
Before a single-sided display can be mounted, the LAN cable must be connected to the rear of the
display first. The first step is to remove the metal strain reliever plate from the back of the display by
unscrewing the 2 screws.
Figure 160. Remove the strain reliever plate
Plug the RJ-45 connector of the network cable into the ethernet socket of the display and place the
strain reliever plate back in place.
Figure 161. Plug in the RJ-45 connector