User's Manual

TD 93021US Rev A
10 FEB 2014 / Ver A 76
Installation Guide
teleCARE IP
Figure 93. External Call Contact with Call LED
WARNING:
• The equipment that is connected to this interface is not considered to be part pf the system
configuration unless the equipment complies with ANSI/UL 2560 standard for Emergency Call
Systems for Assisted Living and Independent Living Facilities.
• The SWITCH and LAMP circuits are not electrically isolated.
• The cable length for the SWITCH circuit must not exceed 33ft (10m) and the cable must be
appropriately separated from power cables and sources of electromagnetic interference.
• The LAMP circuit is power limited to 5.5Vdc at 06.mA.
• The SWITCH circuit is power limited to 5.5Vdc at 06.mA.
teleCARE Bedside Module
5.5Vdc
LAMP
SWITCH
GND