User's Manual

TD 93021US Rev A
10 FEB 2014 / Ver A 159
Installation Guide
teleCARE IP
9.4 Room Controller with Corridor Lamps (Master/Slave)
The example below shows the combination of a room controller and 2 corridor lamps. In the example
there are three resident rooms, each containing 3 beds and a toilet with shower.
One of the rooms is connected to the room controller and each of the other rooms is connected to a
corridor lamp. Each corridor lamp is connected to one of the room buses of the room controller.
Figure 179. Room controller with corridor lamps installation
Ethernet LAN
24Vdc Power Supply Bus
Room Bus 2 and 24VdcRoom Bus 0 and 24Vdc
Passive Bus
Room Bus 2Room Bus 1Room Bus 0
Room Controller
Corridor Lamp (Slave)
Corridor Lamp
(Slave)
Address 0
Address 4
Address 0
Address 1
Address 0
Address 1Address 1
Address 2Address 2Address 2 Address 3Address 3Address 3
Passive Bus
Address 4
Passive Bus
Address 4