User's Manual

TD 93021US Rev A
10 FEB 2014 / Ver A 154
Installation Guide
teleCARE IP
9.2 2-Bed Room with Passive Toilet Cancel and Passive Pull Cord Peripherals
The following installation of a teleCARE IP system consists of one room controller with integrated
corridor lamp (NIRC) to which the peripherals are connected. The room controller offers three room
buses which connect the peripherals to the room controller
The example shown in the Illustration below is a 3-bed room with a toilet and shower. Each bed is
equipped with a bedside module, and a handset.
Passive peripherals are used for the toilet and shower. These peripherals are connected to a passive
bus from the door side module.
Note:
1).In the examples that follow, all references to the NISE socket extension module and NIMS medical
rail socket do not apply for UL 2560 systems.
2). References to the NISE socket extension module can be interpreted as applying to the speech
module (NISP) instead.