User's Manual

TD 93021US Rev A
10 FEB 2014 / Ver A 152
Installation Guide
teleCARE IP
9 Installation Examples
9.1 2-Bed Room with Active Toilet Cancel and Active Pull Cord Peripherals
A typical basic installation of a teleCARE IP system consists of one room controller with integrated
corridor lamp (NIRC) to which the peripherals are connected. The room controller offers three room
buses which connect the peripherals to the room controller
The example shown in the Illustration below is a 2-bed room with active peripherals for the toilet and
shower. Each bed is equipped with a bedside module, and a handset.
Figure 173. Typical 2-bed room with active toilet and shower peripherals
Ethernet LAN
24Vdc
Room Bus 0
Room Bus 1
Address 0
Address 1
Address 2
Address 4
Address 1
Address 0
Room Controller
(with Corridor Lamp)