User's Manual

TD 93021US Rev A
10 FEB 2014 / Ver A 140
Installation Guide
teleCARE IP
Figure 191. Removing the front cover of the NILF
Place the NILF onto the door post or the wall at approximately 4 feet (1.2 meters) from the ground and
mark the holes for drilling with a sharp pencil.
Figure 192. Mark the holes for drilling
Screws with a diameter of 1/8 in. (3.8mm) should be used to mount the NILF to the door post or the
wall. Two suitably sized holes should be drilled at the marked spots. In a wooden door post holes
should be drilled that are slightly smaller than the size of the screws that are used. When mounting