User's Manual

TD 93021US Rev A
10 FEB 2014 / Ver A 144
Installation Guide
teleCARE IP
External Connections
The 8-pole external connector (J2) has connections for a second beacon used for range extending in a
master/slave configuration, a galvanically separated tamper alarm relay output, the internal battery
and an external 24 Vdc power supply input.
Figure 199. External connections - J2
For master / slave connection see “Master / Slave Beacon Interconnection” on page 147.
For tamper alarm relay connection see “Tamper Alarm” on page 150.
For 24Vdc external power supply connection see “External Power Supply Connection” on
page 150.
External Connector Description
1SYNC
Master / Slave interconnection
Beacon synchronization
2GND
3TAMP
Tamper alarm relay output
(galvanically separated)
4TAMP
5+BAT
Battery connection
6GND
7 +24V
External 24Vdc power supply
connection
8GND