User's Manual

TD 93021US Rev A
10 FEB 2014 / Ver A 141
Installation Guide
teleCARE IP
the NILF on a wall, holes should be drilled that accept a wall plug suitable for using screws with a
diameter of 1/8 in. (3.8mm).
Figure 193. Drill the two holes with the proper drill
Mount the NILF on the door post or wall.
Figure 194. Placing the NILF on the door post
The two screws should be tightened carefully using the appropriate screwdriver. Make sure that the
NILF does not bend when tightening the screws.