User's Manual

TD 93021US Rev A
10 FEB 2014 / Ver A 139
Installation Guide
teleCARE IP
NILF Installation
The slim design makes the NILF suitable for surface mounting on walls or at a door post at
approximately 4 feet (1.2 meters) from the ground.
Figure 190. NILF installation example
WARNING: The NILF produces a low frequency magnetic field. Installing the NILF in proximity of
metal objects or electrical cables can negatively influence the magnetic field which
reduces the LF field coverage.
Open the NILF by removing the screw that is located at the bottom of the housing. To remove the
front cover slightly lift it up and gently pull it off of the rear cover.