Installation and Operation Manual

TD 92579EN
10 April 2015 / Ver. N
Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 7.2.X)
77
4 Click "OK".
The Current Update Serials section shows the valu
es of the variables set after the last
execution of the associated command.
4.8.2 Configure Logging
TCP The syslog entries are transmitt
ed using a TCP connection.
SYSLOG The entries are reported to a “sys
logd” server in the network,
which is responsible for further evaluation or storage of the
entries.
HTTP The syslog entries are transferred t
o a web server where they
can be further processed. Each individual syslog entry is
transmitted as form data to the web server in HTTP GET
format.
HTTPS The syslog entries are transferred t
o a web server where they
can be further processed. Each individual syslog entry is
transmitted as form data to the web server in HTTPS GET
format.
There are three ways to collect logs,
see the table below.
Store the Syslog Entries using a TCP Connection
1 Select Services > Logging
2 Select "TCP" in the Typ
e drop-down list.
3 Enter the "IP address" of the logging
server in the Address text field.
4 Enter the "Port" of the logging server in the Port text
field.
5 Click "OK".
Store the Syslog Entries in a Syslogd
1 Select Services > Logging.
2 Select “SYSLOG” in the Typ
e drop-down list.
3 Enter the “IP address” o
f the syslogd in the Address text field.
4 Enter the desired syslogd message class in the Class text f
ield.
5 Click “OK”.
Store the Syslog Entries on a Web Server
1 Select Services > Logging.
2 Select “HTTP” or "HTTPS" in the Type dr
op-down list.
3 Enter the IP address in the IP Address text f
ield.
4 Enter the port
in the Port text field.
5 Enter the relative URL of the form program on your web server in the Path text
field.
6 Click “OK”.
Note: T
he IPBS/IPBL will make an HTTP GET request or HTTPS GET request to the web server
on the registered URL followed by the URL-encoded log entry.