Installation and Operation Manual

Table Of Contents

TD 92579EN

10 April 2015 / Ver. N

IP-DECT Base Station & IP-DECT Gateway (software version 7.2.X)

Figure 4. Configure NTP settings

1 Select General > NTP.

2 Enter the IP address to the primary NTP server in the Time Server text field.

3 Enter a time interval in the Interval (min) text field.

4 Select time zone in Time zone drop-down list. If the desired time zone is not in the

list, select “Other” and edit the String text field following the instructions in the

next step.

5 Enter the timezone string if automatically updates summer/winter is desired.

• Std = Time zone (for example EST for Eastern Standard Time).

• Offset = time difference between the timezone and the UTC (Universal Time

Coordinator).

• Dst = summertime zone (for example EDT for Eastern Daylight Time).

• Second Offset = time difference between the summer time and the UTC.

• Date/ Time, Date/ Time = beginning and end of summertime.

- date format = Mm.n.d (d day of n week in the m month)

- time format = hh:mm:ss in 24-hour format.

Note that a week always starts on a Sunday and the number for Sunday is 0.

Example:

North Carolina is located in the Eastern Time Zone. Eastern Standard Time (EST) is 5

hours behind UTC (StdOffset = EST5), the Eastern Daylight Time (EDT) is 4 hours

behind UTC (DstOffset = EDT4). Summertime for the year 2013 begins at two a

clock, on a Sunday, the second week in March (M3.2.0/2). The summertime ends at

two a clock, on a Sunday, the first week in November (M11.1.0/2).



6 Click “OK”.

4.1.5 Certificates

The Certificates tab is part of IP Security in IP-DECT. For more information on IP Security,

see chapter 2 IP Security on page 3.

Select General > Certificates.