Installation and Operation Manual

TD 92579EN
10 April 2015 / Ver. N
Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 7.2.X)
144
3. Enable WebDAV and set authoring rules for WebDAV
14 In "Internet Information Services (IIS) Manager": Left-click on "Default Web Site".
15 Left-double click on "WebDAV Authoring Rules"
16 Left-click on "Enable WebDAV" (link).
17 Left-click on "Add Authoring Rule..." (menu item)". The "Add Authoring Rule"
window is shown.
18 In section Allow access to this content to:, select the All users option.
19 In section Permissions, select the Read, Source and Write check boxes.
20 Click "OK".
4. Enable Digest Authentication
Note: Digest Authentication requires that the Web server is joined to a domain.
21 Left-click on the virtual directory.
22 Left-double click on "Authenticaton" and left-click on "Enable" (link).
5. Enable Directory Browsing
23 Left-click on the virtual directory.
24 Left-double click on "Directory Browsing" and left-click on "Enable" (link).
6. Add an AD user and give the user write access to the directory
Note: This section requires an existing Active Directory (AD) user.
25 Right-click on the virtual directory and left-click on "Edit Permissions..." (menu
item). The Properties window for the virtual directory is shown.
26 Click on the Security tab.
27 Click on "Edit..." (button). The "Permissions for virtual directory name" window is
shown.
28 Click on "Add" (button). The "Select Users, Computers, Service Accounts, or
Groups" window is shown.
29 In the Enter the object names to select (examples): text field, enter the name of an
AD user. Click on "Check Names" (button) to the right of the text field.
30 Click "OK".
31 In the "Permissions for virtual directory name" window: Allow modify permission
for the AD user by selecting the Allow check box for the Modify permission.
32 Click "OK".
33 Click "OK".
7. Add a command file to the directory referred by the virtual directory
34 Add a command file to the directory referred by the virtual directory. For
information on the command file syntax, see
A.1.4 Setting the UP0 Parameters on
page 140.