Installation and Operation Manual

TD 92579EN
10 April 2015 / Ver. N
Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 7.2.X)
143
Figure 16. To configure Microsoft IIS as an Update Server.
1. Install server role and role services on the Web server
1 Connect to the Windows 2008 R2 server.
2 In Server Manager": Right-click on "Roles" and select "Add Roles" (menu item).
The "Add Roles" wizard starts.
3 Click "Next".
4 Select the server role Web Server (II) check box.
5 Click "Next".
6 Click "Next".
7 Make sure that the following role services check boxes are selected and leave the
rest unchecked:
- Directory Browsing
- WebDAV Publishing
- Digest Authentication
8 Click "Next".
9 Click "Install".
2. Add a virtual directory on the Web server
10 In "Internet Information Services (IIS) Manager": Right-click on "Default Web Site"
and select "Add Virtual Directory..." (menu item). The "Add Virtual Directory"
window is shown.
11 In the Alias text field, enter a name for the virtual directory.
12 In the Physical path: field, click on the "..." button to the right of the field and
browse to the location where the virtual directory shall be stored. Create a new
virtual directory and name it.
13 Close the "Add Virtual Directory" window, click "OK".
2. Add a virtual
directory on the
Web server
4. Enable Digest
Authentication
5. Enable Directory
Browsing
6. Add an AD user
and give the user
write access to
the directory
3. Enable WebDAV
and set authoring
rules for WebDAV
8. In the IP-DECT
device, enter the URL
to the command file
7. Add a command
file to the directory
referred by the
virtual directory
9. In the IP-DECT
device, enter the URL
to the directory
where the command
file is located
10. Test to upload
configurations on
the Web server
1. Install server role
and role services
on the Web server