a The world in your hands Ascom Eurit 33 / 33 plus ISDN telephone Operating Instructions
Safety tips Note the following safety precautions for positioning, connecting and operating the telephone. ➭ Place your telephone on a non-slip mat! ➭ Position the connection cable carefully to avoid accidents! ➭ Avoid positioning the telephone near heat sources, in direct sunlight and in the vicinity of other electrical equipment. ➭ Protect your telephone against dust and avoid exposing it to moisture, steam or aggressive liquids.
Operating elements and displays 1 2 3 4 5 6 MENU DEF ABC 1 PARK R GHI ESC LOG 2 3 JKL MNO 4 5 PQRS TUV 7 8 0 16 15 14 13 12 11 10 9 8 7 20312912en_ba_a0 Display: Signs and symbols \ û ∏ õ õ˜ ó ˚ √ – — ã £ ô @ Î ÿ ˙ ∞∞ Show next display Show previous display Inbox (calls, messages, mails) Mail Send mail Telephone answering machine TAM Number suppressed Play Stop Pause Previous message (skip) Display previous selection Next message (skip) Display next selection Answer only Answer
20312912en_ba_a0 Operating elements and displays 1 Display Two-line alphanumeric display with 24 characters per line 2 Foxkey (multifunction key) The available functions are shown under the display line and directly called up by pressing the Foxkey under the relevant text. 3 Menu key Press once: Select main menu, return from sub-menus to the main menu. Press and hold down: Switch TAM on and off for all users 4 Telephone answering device LED Unlit: TAM switched off. Lit: TAM switched on, no messages.
Contents A Eurit 33 / 33 plus Euro-ISDN Telephone In purchasing the Eurit 33 / 33 you have selected a Swiss-quality product. Thank you for your confidence in our company. The Eurit 33 / 33 is designed for connection to the public Euro-ISDN network. If you plan to use the Eurit 33 / 33 plus in conjunction with a PBX, please refer to the Chapter »PBX Operation«.
Contents Dialling ................................................................................................................................. 11 On-hook dialling ................................................................................................................ 11 Redial ................................................................................................................................. 11 Dialling numbers from the caller list...................................................
Contents Basic settings ....................................................................................................................... 38 User setup .......................................................................................................................... 38 Deleting users .................................................................................................................... 39 Setting the date and time ...................................................................
Contents Remote access with economy function ............................................................................... 69 Remote access functions .................................................................................................... 70 Setting room surveillance ................................................................................................... 73 Setting a direct access number ...........................................................................................
Setting up the telephone Contents of the package Eurit 33 / 33 plus with mounted housing Handset Telephone connection cable Spiral handset cord Transparent cover for write-on panel Operating Instructions Connecting the telephone The connection sockets are located on the underside of the telephone. Connect the handset first by plugging the connector of the longer, straight end of the handset cord into the socket on the underside of the telephone . Make sure the connector clicks into place.
Setting up the telephone Display on setup Once you have connected your Eurit 33 / 33 plus the display shows the prompt: »Bitte geben Sie mindestens eine MSN (Mehrfachrufnummer) mit Bezeichnung ein«. (Please enter at least one MSN (Multiple Subscriber Number) with code). To be able to use all the functions of your Eurit 33 / 33 plus, you must define at least one user (i.e. enter at least one Multiple Subscriber Number [MSN]).
Setting up the telephone Changing the housing Your telephone is delivered with a standard mounted housing (upper housing cover). You can change the housing as required, in order to customise your telephone. Other housings in a range of colours are available from your telephone retail outlet as accessories for the Eurit 33 / 33 plus. Unplug the telephone before changing housings! To change the housing, grip the upper left-hand corner (above the display) with the right hand.
Basic operating information User concept The Eurit 33 / 33 plus allows you to set up to five users for one telephone. For example, if you use the telephone at home you can set the following users:»Mother«, »Father«, »Child 1«, »Child 2«, and »Child 3«. If, for instance, you use it for work and private applications, you can set »Company«, »Private«, »Club 1«, »Club 2«, and »Club 3«. You can switch from one user to another by pressing the user key. The display shows the active user’s code (A, B, C, D or E).
Basic operating information Display in standby mode If your Eurit 33 / 33 plus is in standby mode, the display shows the date, status pictograms (if applicable), the time and the active user code. If more than 8 status pictograms are displayed, the date is not shown. 21.01.99 ˚fi 11:11 Œ áÛ‰î˙≈˚ùfi 11:11 Œ 21.01.99 Suppress No. ˚ 11:11 Œ Standby mode for more than 8 status pictograms.
Basic operating information Menus The Eurit 33 / 33 plus offers simple operation thanks to menu-driven guidance. Entries in the phonebook (and subsequent editing), settings and programming are performed using menus. If you have selected menus or submenus, the handset must always be on-hook. If you receive a call or lift the handset during menu selection, the procedure is automatically aborted. Use the menu key and Foxkey to select menus or submenus as follows: ESC 21.01.
Dialling On-hook dialling 1 2 3 4 5 6 7 Dial: 0551234567_ ∞∞˜ ˜∞∞ del 9 0 Enter the number you wish to call. You can press the Foxkey under ∞∞˜ to search for and dial a number stored in the phonebook (see »Dialling from the phonebook«) Press the Foxkey under ˜∞∞ to enter the dialled number in the phonebook. Press the Foxkey under »del« to delete the character at the cursor position. ƒ 0551234567_ terminate Œ Press loudspeaker key. ˆ 0551234567 DM 0.
Dialling Dialling numbers from the caller list Every unanswered call is entered in an individual caller list for each user. Up to 30 calls are stored in the caller list (in total for all users). If someone has tried to reach you, a message - for example »∏3(5)« - appears in the lower display line. The number in brackets indicates that 5 calls have been made to your Eurit 33 and the number preceding this indicates that 3 calls were intended for the active user. 11.11.
Dialling Dialling from the call LOG Your Eurit 33 / 33 plus stores the last 10 answered calls (total for all users) in the call LOG. LOG 0551234567 del ˜∞∞ Ú û ≠ \ Newman John del No. Ú û ≠ \ 0551234567 del ˜∞∞ Ú û ≠ \ 0551234567 terminate ≠ Press the LOG key, if necessary several times, to select a number from the list of answered calls. The display shows the number of the most recently answered call or, if this is stored in the phonebook, the caller’s name.
Dialling Dialling from the phonebook Phonebook new MENU Angel Tim change new del û Œ \ Press menu key »Phonebook«.appears in the display. û Œ \ Press Foxkey under \ ou û. The first or last entry in the phonebook is displayed. To dial a number from the phonebook you have two options: Either enter the first letters ... MNO 6 MNO 6 Nail Nancy change new del û Œ \ Newman John change new del û Œ \ ƒ Newman John terminate Œ For example, for the name »Newman«, press Key 6 twice.
Telephoning Incoming calls Incoming calls are signalled by the user’s own set ringing melody, in order to acoustically distinguish between calls for different users. The display shows the caller’s number provided Calling Line Identification Presentation is active or the number is available. If the number is stored in the phonebook, the name is automatically displayed. The name on the left of the display shows which user is being calls.
Telephoning Setting the volume during a call The volume is set to medium. During a call you can adjust the volume (1 to 7). - + ➭ During a call press the plus key (up) or minus key (down) to change the volume in the handset and loudspeaker. The setting is saved. The volume can be set individually for each user. Listening by loudspeaker Other people can listen to your call over the loudspeaker. The microphone is switched off. ƒˆ Newman John DM 0.
Phonebook To make calls quickly and simply, you can enter at least 100 names and numbers in a phonebook. The phonebook is accessible to all users. General information Letters are printed above the numbers on your keypad. To enter a letter, press the relevant key once or more until the letter appears. (For example, to enter »S«, press key 7 four times. By pressing the Foxkey under »Aêa« or »aêA« you can switch between upper and lower case.
Phonebook If long numbers/names are entered, ˝ is displayed as the first character when the line is wrapped. The start is shown again once entry is completed. Press the Foxkey repeatedly under \ or û to scroll through the phonebook. Entering attributes Attributes contain additional information (specific character sequences) on a number in the phonebook. They are used by your Eurit 33 / 33 plus to control functions e.g. activate Calling Line Identification Restriction (CLIR).
Phonebook New entry To make a new entry in your phonebook, proceed as follows: MENU Phonebook new û Œ \ Press the Foxkey under »new«. Name: _ ok Aêa 1 2 3 4 5 6 7 9 0 Name: Newman John_ ok aêA del 2 3 4 5 6 7 9 0 No.: 1234_ ok Attribute del No.: 1234_ back Provider No.: 1234_ Subaddress EAC No.: 1234Z_ ok Attribute Enter the name. All available characters are permitted (see »General information«). Press the Foxkey under »ok«. No.
Phonebook Press the Foxkey under »ok«. The display shows the response given when this number calls. Reaction: none ok £ @ Press the Foxkey under @ or £ until the desired reaction is displayed.
Phonebook Changing an entry Phonebook new MENU Newman John change new del û Œ \ Press menu key »Phonebook« appears in the display. û Œ \ Press the Foxkey under \ or û. The first or last entry in the phonebook is displayed. To search the phonebook, you have two options: Either enter the first letters ... MNO 6 MNO 6 Nail Nancy change new del û Œ \ For example, for the name »Newman«, press Key 6 twice. The display shows the first name beginning with »N«.
Phonebook 1 2 3 4 5 6 7 9 0 No.: P20551234567 ok Attribute del If necessary, enter additional information on the attribute (e.g. provider number, subaddress or keypad). Reaction: none ok £ @ Press the Foxkey under »ok«. The display shows the reaction when a caller on this number calls. Reaction: on TAM ok £ @ Press the Foxkey under @ or £ until the desired reaction is displayed.
Advanced features Call forwarding Call forwarding can only be activated if at least one user is programmed for this function! Every user can program three options for forwarding to any number: – Permanent call forwarding Incoming calls are forwarded immediately. – Call forwarding on busy Calls are forwarded if the user is busy. – Delayed call forwarding Incoming calls are forwarded after 5 rings.
Advanced features Call FWD:ì í Ω change û Œ \ Press the Foxkey under »ok«. The display again shows »Call FWD:« followed by the symbols corresponding to all programmed forwarding options. ➭ The telephone is delivered with all forwarding options deactivated. ➭ Destination numbers remain in memory even after a forwarding option is deactivated. ➭ You can also forward calls using speed-dial numbers (see Chapter on »Speed-dialling«).
Advanced features ➭ Note that for technical reasons the displayed taxes may differ from the amount billed. The amount indicated on your telephone bill is binding. ➭ If you are using a provider, tax information may not be available. In this case your Eurit 33 cannot display taxes. ➭ Press the user key to switch users (if the user symbol is displayed in the upper line), in order to compare taxes incurred by different users.
Advanced features Setting appointments (alarm function) You can set up to 5 appointments (1 appointment per user). Possible settings are: Once-only appointment or daily appointment at a specific time. MENU Functions îAlarm: change off îInterval: ok Daily 1 2 3 4 5 6 7 9 0 Œ \ Press menu key until »Functions« is displayed û û Œ \ Press the Foxkey under \ until »Alarm« is shown. The current setting is displayed. off once Press the Foxkey under »Change«. »îInterval« appears in the display.
Advanced features Switching between calls You have initiated an enquiry call and now wish to switch alternately between the two parties. R Press R key. You are connected to the first call partner. R Press R key again. You are connected to the second call partner. ➭ When switching between calls, the number of the active call partner is displayed. ➭ To terminate one of the active connections, press the Foxkey under »terminate«.
Advanced features Three-party conference You are engaged in two calls and wish to talk to both partners simultaneously. Newman John Conference Keypad Œ @ Press the Foxkey under @ until »Conference« appears in the lower display line. Conference terminate @ Press the Foxkey under »Conference«. You are now connected to both parties in a 3way conference. Newman John transfer terminate Œ @ Press the Foxkey under »terminate«.
Advanced features Automatic callback or redial if busy If the person you are calling is busy, you can activate automatic callback or automatic redial. If automatic callback is active, a connection is set up automatically as soon as the person is free (i.e. has replaced the handset). Up to 10 automatic callbacks can be activated for all users. If you have activated automatic redial, the number is redialled after an interval (programmable between 5 and 240 seconds).
Advanced features ➭ You can deactivate a callback by pressing the Foxkey under @ until »Callback« appears in the lower display line. Press the Foxkey again under »Callback« to show a list of all set callbacks. Press the Foxkey under »del« to delete the set callback displayed. ➭ If you are connected to a PBX, please refer to the relevant chapter in your PBX manual. Call waiting / accepting a second call If another call comes in during an active call, the second call is signalled by the call waiting tone.
Advanced features ˝˝˝˝˝˝˝accept˝˝˝˝˝˝˝˝˝˝ Newman John DM 0.50 terminate ➭ Press the Foxkey under »OK«. The call is forwarded. An acknowledgement appears. Œ To remain undisturbed during an active call, you can deactivate the »Call waiting« function (see »Call waiting«). Park You can park a call and retrieve it on another telephone within 3 minutes, after which the connection is terminated.
Advanced features Speed-dialling 10 speed-dialling memories are available (for all users, user-independent). You can program frequently used numbers or functions under the speed-dialling memory. For detailed information on the individual functions, refer to the relevant chapter in these Operating Instructions.
Advanced features ➭ Sending a subaddress is only possible in on-hook dialling. ➭ For PBX operation the number must be entered with prefix but without Exchange Access Code (EAC). ➭ If you have not already programmed a speed-dialling number, you can call up the programming function by pressing the relevant speed-dial key. The attribute »Function« is used to define the following functions: Description F01 Manual rejection of incoming calls F02 xx..xx Send DTMF F03 xx..
Advanced features Malicious Call Identification (MCID) This service must be requested from your network provider. This function allows the number of the caller and the called party to be registered by the exchange along with date and time. Malicious calls can be registered during the call and up to 20 seconds after the caller has hung up. ➭ Malicious calls can only be registered with the handset off-hook (i.e. not in handsfree or listening by loudspeaker mode). To activate MCID: No.
Advanced features Subaddresses Subaddresses are used for remotely controlling equipment that supports subaddresses. The Eurit 33 / 33 plus does not evaluate incoming subaddresses. You can enter subaddresses during onhook dialling as follows: 1 2 3 4 5 6 7 9 0 1 2 3 4 5 6 7 9 0 Dial: 0551234567_ ∞∞ê ê∞∞ del Œ Enter the number you wish to call. Dial: 0551234567_ Subaddress Keypad Œ Press the Foxkey under @ . The lower display line shows the options »Subaddress« and »Keypad«.
Advanced features Send mail (UUS) You can use your Eurit 33 / 33 plus to send mails (messages up to 32 characters in length) to other subscribers (UUS = User to User Signalling). These mails are displayed on the called person’s telephone without them answering the call. Mails are registered in the caller list. MENU Functions ıMail (UUS) send read û Œ \ û \ 2 3 4 5 6 7 9 0 1 2 3 4 5 6 7 9 0 Press the Foxkey under \ until »ıMail (UUS)« is shown. Press the Foxkey under »Send«.
Advanced features Info messages You can record info messages for other users on the Eurit 33 plus. These info messages can be played back and deleted by recipients in the same way as TAM messages. Info messages are registered in the caller list. MENU Functions Info message change û Œ \ Press the menu key until »Functions« is displayed û Œ \ Press the Foxkey under \ until »Info message« is shown Recipient: John rec £ @ Press the Foxkey under »Change«. The active user is suggested as recipient.
Basic settings The basic settings described here are telephone settings i.e. they are valid for all users. User setup Up to 5 users can be defined. Every user is assigned an MSN (Multiple Subscriber Number A, B, C, D, E). Your telephone rings when one of the set MSNs is called. MENU Installation Press menu key until »Installation« is displayed. û \ Set MSN change û \ Press the Foxkey under \. »MSN« appears in the display. Set Œ MSN change û \ Press the Foxkey under »Change«.
Basic settings Deleting users To delete a user: MENU Installation Press menu key until »Installation« is displayed. û \ Set MSN change û \ Press the Foxkey under \. »Set MSN« appears in the display. Set Œ MSN change û \ Press the Foxkey under »Change«. »Set MSN A« appears in the display. Set ª MSN change û \ MSN ª: 1234569 ok Press the Foxkey under »Change«. del Press the Foxkey under »del« until all the MSN digits are deleted. After the last digit is deleted, »del« disappears.
Basic settings Setting the date and time When starting up your telephone or following a power cut the time display flashes. After the first outgoing and answered call the time and date are automatically updated (provided your connection supports this function).The time no longer flashes. Any discrepancies are corrected for each outgoing call. You can also set the time and date manually. MENU 1 2 3 4 5 6 7 9 0 1 2 3 4 5 6 7 9 0 û \ Press the menu key until »Installation« is displayed.
Basic settings Setting the language Your telephone is delivered with the national language preset.You can set it for German, French, Italian or English as follows: MENU Installation Language change û \ Press menu key until »Installation« or »Installazione« appears. û \ Press the Foxkey under \ until »Sprache« »Langue«, »Lingua« or »Language« appears. Language: Deutsch ok Francais Sprache: English ok Italiano û \ Press the Foxkey under the appropriate language.
Basic settings Switching the headset on and off The Eurit 33 / 33 plus is equipped with an interface for connecting a headset. Switch the headset on or off as follows: MENU Installation áHeadset change \ Press the menu key until »Installation« is displayed. û \ Press the Foxkey under \ until »áHeadset« is shown. áHeadset: off ok on Press the Foxkey under »change«.The upper display line shows the set status and the lower display line shows the selectable status.
Basic settings Settings for automatic redial (autodial) For automatic redial, the number of redials and the interval between redials can be set as follows: MENU 1 2 3 4 5 6 7 9 0 Installation Press menu key until »Installation« is displayed. û \ Autodial change û \ Press the Foxkey under \until »Autodial« is shown. Redial: 10 change û \ Press the Foxkey under »change«. The set number of redials is displayed.
Basic settings Setting the contrast You can adjust the display contrast as follows: MENU Installation Contrast change û \ Press the menu key until »Installation« is displayed. û \ Press the Foxkey under \ until »Contrast« is displayed. Contrast: ooo____ ok £ @ Press the Foxkey under »change«. The upper display line shows the set contrast with a bar symbol. Contrast: ooooo__ ok £ @ Press the Foxkey under £ or @ to reduce or increase the contrast. The changed contrast is shown in the display.
Basic settings Setting the tax factor and currency For correct advice of charge display you must set the tax factor and currency. Your telephone is delivered with national values preset. You can change the tax factor and currency as follows, e.g. from 0.1210 DM per charge pulse to 0.1 FR. MENU û \ Press the menu key until »Installation« is displayed. û \ Press the Foxkey under \ until »Taxes« is displayed. Press the Foxkey under »Change«. Tax factor: 0.
Basic settings Editing the provider list / dialling via provider Irrespective of your network provider, you can also conduct calls via other providers if you subscribe to this service. You have the following options for automatic provider choice: – Provider prefix dialling: All outgoing calls with this prefix are always routed through this provider (e.g. prefix »0« for long distance, »00« for abroad, »0033« for France, etc.).
Basic settings 1 2 3 4 5 6 7 9 0 ESC No.: 10765 ok del No.: 10775_ ok del Enter or change the 5-digit provider code. 3: Telco3 (10775) change û \ Press the Foxkey under »ok«.The provider is stored in the list. Provider list change \ Press ESC key. »Provider list« appears again in the display. û Auto. provider choice change û \ 1: 00 with Telco3 change û \ 2: No entry change \ û 2 3 4 5 6 7 9 0 No.
User settings The following settings can be defined individually for each user. ➭ These settings can only be made if at least one user is defined (see »Basic settings«). Setting the ringing melody and volume Every user can select from seven different ringing melodies and volumes. MENU Settings Ringing tone change Œ \ Press the menu key until »Settings« is displayed. û û Œ \ Press the Foxkey under \ until »Ringing tone« is displayed. Melody: 1 ok £ @ Œ Press the Foxkey under »change«.
User settings Switching the call filter on and off If the call filter is activated, calls from numbers in the phonebook for which »no filter« has not been defined are rejected (the caller hears the busy signal). Only calls from numbers for which »no filter« has been set are signalled even if the call filter is activated (see »Phonebook«). Your Eurit 33 / 33 plus is delivered with the call filter off. Every user can switch the call filter on or off individually.
User settings CLIR (Calling Line Identification Restriction) When you make a call, your number (i.e. your MSN) is indicated on the called person’s telephone. If you are called, the caller immediately sees your number when you lift the handset. Every user can suppress their number for outgoing and incoming calls in order to remain anonymous. MENU Œ \ Press the menu key until »Settings« is displayed. û Suppl. services change û Œ \ Press the Foxkey under \ until »Suppl. services« is displayed.
User settings Call waiting During a call another incoming call is acoustically signalled. For further information on »Call waiting«, refer to »Advanced features«. Every user can suppress »Call waiting« in order to remain undisturbed during an active call. MENU Œ \ Press the menu key until »Settings« is displayed. û Suppl. services change û Œ \ Press the Foxkey under \ until »Suppl. services« is displayed. ˚CLIR: off change û Œ \ Press the Foxkey under »change«.
User settings Entering the park code Every user can program his own park code if he wishes to park calls using a code other than the default code 1. MENU 1 2 3 4 5 6 7 9 0 Settings Press the menu key until »Settings« is displayed. û Œ \ Suppl. services change û Œ \ Press the Foxkey under \ until »Suppl. services« is displayed. ˚CLIR: off change û Œ \ Press the Foxkey under »change«. »CLIR« is shown in the display, followed by the actual setting »off« or »on«.
Eurit 33 plus telephone answering machine (TAM) Introduction Your Eurit 33 plus comes with an integrated telephone answering device (TAM). Greetings (outgoing announcements) and incoming messages are digitally stored i.e. the TAM requires no magnetic recording tape and hence no maintenance. All messages can be played back quickly and simply. The entire recording time for greetings and incoming messages depends on the set recording quality (see »Recording quality/recording time«).
Eurit 33 plus telephone answering machine (TAM) Activating/deactivating the TAM for all users Activating the TAM MENU Greeting Œ: 1 – 21.01.99 [√] fi 17:36 Œ ∏1(5) Press the menu key and hold it down until the TAM is activated. The TAM LED is lit and the greetings are played. If no personal greetings have been recorded, the default greeting is heard (see »Default greeting«). Press the Foxkey under – to interrupt playback. The status pictogram fi is shown in the display. The TAM is ready.
Eurit 33 plus telephone answering machine (TAM)) 21.01.99 ∏1(5) fi 17:36 Œ Press the Foxkey under – to interrupt playback. The status pictogram fi is shown in the display. The TAM is ready for the active user. Deactivating the TAM individually MENU ➭ Settings û Œ \ fiTAM: on change off û Œ \ fiTAM: off change off û Œ \ Press the menu key until »Settings« is displayed. Press the Foxkey under \ until the display shows »fiTAM«, followed by the current setting, »on«.
Eurit 33 plus telephone answering machine (TAM) Greetings You can record up to 5 greetings on your Eurit 33 plus. The 5 greetings are available to all users. Every greeting can be up to 3 minutes long. Default greeting You can also activate your TAM without recording your own greeting, since the Eurit 33 plus is delivered with a default greeting. »Unfortunately there is no one available right now to answer your call. Please leave a message after the tone. Thank you.
Eurit 33 plus telephone answering machine (TAM) Greeting Œ: 3 – [√] By pressing the Foxkey under √ you can listen to the greetings saved under this number (if »none«, the default greeting is heard). Lift the handset (the greeting can only be recorded with the handset off-hook). Greeting: 3 ok £ @ Greeting: 3 Greeting: 3 ok £ @ Greeting: 3 change Type: ÿ Î √ rec – [rec] Type: Î ÿ √ rec Type: Î û \ Press the Foxkey under »rec«. Ready signal is heard. Speak.
Eurit 33 plus telephone answering machine (TAM) Selecting / playing back the greeting Once greetings have been recorded, every user can select and set the greeting that best suits the situation. 21.01.99 MENU ∏1(5) Settings 17:35 ≠ Select user (see »Changing users«). Press the menu key until »Settings« is displayed û ≠ \ fiTAM: on change off û ≠ \ Press the Foxkey under \ until the display shows »óTAM«, followed by the current setting »off« or »on«.
Eurit 33 plus telephone answering machine (TAM) Deleting / changing greetings You can delete recorded greetings and replace them with a new one. 21.01.99 MENU ∏1(5) 17:35 ≠ Settings Press the menu key until »Settings« is displayed û ≠ \ fiTAM: on change off û ≠ \ Press the Foxkey under \ until the display shows »óTAM«, followed by the current setting »off« or »on«. Greeting: 3 change Type: ÿ û ≠ \ Press the Foxkey under »change«. The display shows the selected greeting and type.
Eurit 33 plus telephone answering machine (TAM) Incoming messages Incoming messages are stored in the message memory of the relevant user depending on the corresponding MSN. The flashing TAM LED and display alert the user to new messages on his personal TAM. Incoming messages are stored in the caller list in the same way as unanswered calls. Up to 30 calls are stored in the caller list (for all users). You can use the caller list to call back or check who has been trying to call you.
Eurit 33 plus telephone answering machine (TAM) Functions during playback Press the Foxkey under – to stop playback. The standby display is resumed. Pressing the Foxkey under ã or ô has the following effect: – Press once briefly. Skip to start of last or next message. – Hold down: Scroll backwards or forwards. When the start of a message is reached, the message is played back. 20312912en_ba_a0 Press the Foxkey under »del« to delete the message. You can also delete a message without listening to it.
Eurit 33 plus telephone answering machine (TAM) Deleting messages Deleting messages during playback 21.01.99 ˚fi 14:15 Œ fi3/4 ∏8(10) fi 0552546111 – ã ô 14:10 del ˝˝˝˝˝˝˝˝deleted˝˝˝˝˝˝˝˝ Newman John – ã ô i 14:10 del 21.01.99 ˚fi 14:16 Œ fi fi2/3 ∏8(10) Press the Foxkey under »óx/y« to play back your own messages (x = number of new messages for the active user, y = total message count for the active user). During playback of the message you wish to delete, press the Foxkey under »del«.
Eurit 33 plus telephone answering machine (TAM) Ring count / economy function The number of rings after which the TAM is activated can be set from 0 to 9. Your telephone is delivered with the default number of rings as 4 and the economy function on. 21.01.99 MENU ∏1(5) Settings 17:35 º Press the menu key until »Settings« is displayed û º \ û º \ Press the Foxkey under \ until the display shows »fiTAM«, followed by the current setting »off« or »on«.
Eurit 33 plus telephone answering machine (TAM) Message length / listen To enable your TAM to store more messages, the length of incoming messages can be limited to 30, 60, 120 or 180 seconds. If the message length is not limited, a message can be »infinitely« long. To listen in to messages over the Eurit 33 plus microphone as they are recorded, »Listen« must be activated. 21.01.
Eurit 33 plus telephone answering machine (TAM) Recording quality / recording time The recording quality of messages is dependent on the set recording time. – high recording quality for a selected recording time of 10 minutes. – medium recording quality for a selected recording time of 15 minutes. – normal recording quality for a selected recording time of 22 minutes. Your Eurit 33 plus is delivered with a high recording quality set.
Eurit 33 plus telephone answering machine (TAM) Recording the closing message You can record a closing message whether the TAM is on or off. The closing message is played back after the set recording time for a message has expired (the closing message is identical for all users).
Eurit 33 plus remote access Introduction You can call up and remotely control your TAM from any telephone i.e. – Listen to and delete messages – Switch the TAM on or off – Record or change greetings. DTMF is used for remote access to the TAM. You can perform the required procedure either with a telephone with DTMF or multi-frequency dialling function, or with a code sender (handheld transmitter).
Eurit 33 plus remote access Setting the PIN-Code The PIN code for remote access is valid for all users. MENU û \ Press the menu key until »Installation« is displayed. û \ Press the Foxkey under \ until »Remote access« is shown Surveillance: off change û \ Remote access PIN change û \ Installation Remote access change 1 2 3 4 5 6 7 9 0 1 2 3 4 5 6 7 9 0 Press the Foxkey under »change«. »Surveillance« is shown in the display, followed by the actual setting »off« or »on«.
Eurit 33 plus remote access Setting up a connection to the TAM When TAM is activated 1 2 3 4 5 6 7 Enter the number. The set greeting is played back, after which a signal is heard. 9 0 1 2 3 4 5 6 7 9 0 Enter the PIN code during the greeting. The greeting is interrupted after the first digit of the PIN code is entered. (If an incorrect code is entered, an error signal is heard. Enter the complete code again). Remote access standby is set up.
Eurit 33 plus remote access Remote access functions Once the connection to the TAM is established, you can enter digits to perform one or more remote access functions. Once a function is ended you can select additional functions. For details see the following functions list: Remote activation / deactivation of TAM Remote activation of TAM for one user: Press key 4. As confirmation, the greeting is played back (press key 2 to interrupt the greeting).
Eurit 33 plus remote access Incoming messages Play back a user’s messages: Press key 3. DEF 3 DEF 3 Skip back to start of message (repeat message) Press key 1 during playback. 1 1 Play back all users’ messages : Press key #, then key 3. 1 Skip back to start of previous message Press key 1 twice during playback. 3 Skip forward to next message: Press key 3 during playback. 0 Delete current message: Press key 0 during playback. DEF 0 0 Delete all a user’s messages: Press key 0.
Eurit 33 plus remote access Call forwarding GHI 7 4 XY W Z TUV GHI 9 8 4 XY W Z XY W Z GHI 9 4 XY W Z QRS MNO 9 9 P 9 P QRS XY W Z 7 XY W Z TUV 9 8 XY W Z XY W Z XY W Z MNO 9 9 9 6 MNO 6 MNO 6 6 Activate »Call forwarding permanent« Press key 9 followed by key 7 then key 4. Enter the destination number if not already programmed. Conclude entry by pressing key #. Activate »Call forwarding on delayed« Press key 9 followed by key 8 then key 4.
Eurit 33 plus remote access Setting room surveillance To activate room surveillance by remote access (remote activation of telephone microphone), the Surveillance function must be on. MENU û \ Press the menu key until »Installation« is displayed. û \ Press the Foxkey under \ until »Remote access« is shown. Surveillance: off change û \ Installation Remote access change Press the Foxkey under »change«. »Surveillance« is shown in the display, followed by the current setting »off« or »on«.
Eurit 33 plus remote access Setting a direct access number If you set a direct access number, all new messages are played during remote access. MENU û \ Press the menu key until »Installation« is displayed û \ Press the Foxkey under \ until »Remote access« is shown Surveillance: off change û \ VIP No. change \ Installation Remote access change û 2 3 4 5 6 7 9 0 VIP No.: 0551234567_ ok ∞∞ê del û \ Enter the direct access number. Press the Foxkey under »ok«.
Eurit 33 plus remote access Setting the number of rings for automatic remote activation of the TAM Your Eurit 33 plus is delivered with the settings for automatic activation of the deactivated TAM after 15 rings. You can set a different number of rings. MENU û \ Press the menu key until »Installation« is displayed. û \ Press the Foxkey under \ until »Remote access« is shown. Surveillance: off change û \ Press the Foxkey under »change«.
Eurit 33 plus remote access Recording a help message To support remote access you can record a help message. This help message is played back after you enter your PIN code. MENU û \ Press the menu key until »Installation« is displayed. û \ Press the Foxkey under \ until »Remote access« is shown. Surveillance: off change û \ TAM Help change \ Installation Remote access change TAM Help ok û √ rec Press the Foxkey under »change«.
PBX operation When operating the Eurit 33 / 33 plus in conjunction with a PBX there are special aspects to take into account. For further information, refer to your PBX operating instructions. Setting the Exchange Access Code (EAC) When operating your telephone in conjunction with a PBX without automatic external line selection, the EAC may need to be set as follows: MENU Installation PBX change 1 2 3 4 5 6 7 9 0 û \ û \ Press the menu key until »Installation« is displayed.
PBX operation Incoming EAC Some PBXs automatically insert the EAC for incoming calls. In this case »Incoming EAC« must be activated so that, for example, numbers from the caller list can be correctly selected. ➭ MENU You can check whether you need to make this setting by having someone external call you (after you have entered an EAC) and not answering the call. If the EAC appears twice before the caller’s number (attention: »0« in the prefix is not an EAC), »Incoming EAC« must be activated.
PBX operation Setting the transfer type This obligatory transfer type setting (EURO or Disconnect) depends on your PBX. ➭ MENU You can find out how to make this setting by attempting to connect your two call partners during an enquiry call (see »Call transfer«). If call transfer is not possible you must change the type from »EURO« to »Disconnect«. Installation PBX change û \ û \ Press the menu key until »Installation« is displayed. Press the Foxkey under \ until »PBX« is shown. Exch.acc.
PBX operation Call transfer on-hook You can set your Eurit 33 / 33 plus to transfer a call on replacing the handset. To make this setting: MENU Installation PBX change û \ û \ Press the menu key until »Installation« is displayed. Press the Foxkey under\ until »PBX« appears. Exch.acc.code (EAC): 0 change û \ Press the Foxkey under »change«. »Exch. acc. code (EAC): xxx« appears in the display (xxx corresponds to the current setting).
PBX operation Keypad information Keypad information is used in conjunction with a PBX to control functions. The exchange can also activate and deactivate features. For further information, refer to your PBX manual. Keypad before dialling 1 2 3 4 5 6 7 9 Dial: _ ª Dial: *21#_ ª Dial: *21# ª Press the asterisk or hash key first. The telephone automatically switches to keypad signalling (automatic switchover to keypad can be deactivated - see »Sending the keypad automatically«).
PBX operation Sending the keypad automatically If the asterisk or hash key are pressed first, the telephone automatically switches to keypad signalling (»Keypad auto.: on«). For some systems (e.g. systems in which automatic external line selection is activated) you must deactivate automatic switchover to keypad signalling (»Keypad auto.: off«), in order, for example, to make an internal call using the asterisk key.
Reset functions Resetting the telephone to default You can reset the telephone to default as follows: MENU 1 Installation Service menu Reset full execute û \ Press the menu key until »Installation« is displayed. û \ Press key 1. »Service menu« appears in the display. û \ Press the Foxkey under \ until »Reset full« is displayed. ˝˝˝˝˝˝˝˝deleted˝˝˝˝˝˝˝˝˝ ➭ Press the Foxkey under »execute«. The telephone is reset to default. An acknowledgement is shown for 5 seconds.
Reset functions Deleting the remote access PIN You can delete the PIN code for remote access to the TAM as follows: MENU 1 Installation Service menu Reset PIN execute û \ Press the menu key until »Installation« is displayed. û \ Press key 1. »Service menu« appears in the display. û \ Press the Foxkey under \ until »Reset PIN« is shown. ˝˝˝˝˝˝˝˝deleted˝˝˝˝˝˝˝˝˝ Press the Foxkey under »execute«. The PIN code for remote operation of the TAM is reset to the default 0000.
Reset functions Deleting the parameters You can delete (reset to default) all user parameters as follows: MENU 1 Installation Service menu Reset parameters execute û \ Press the menu key until »Installation« is displayed û \ Press key 1. »Service menu« appears in the display. û \ Press the Foxkey under \ until »Reset parameters« is shown. ˝˝˝˝˝˝˝˝deleted˝˝˝˝˝˝˝˝˝ Only the user parameters are deleted.
Important information Show software version and checksum You can show the current software version and checksum of your Eurit 33 / 33 plus as follows: MENU Installation Software change ➭ û \ Press the menu key until »Installation« is displayed. û \ Press the Foxkey under \ until »Software« is displayed. Version: D 1.00 NDKT2 û \ Press the Foxkey under »change«. The upper display line shows the current software version. Checksum: execute û \ Press the Foxkey under \. »Checksum« is shown.
Important information Technical Data ISDN Connection Basic rate access Protocol DSS1 (Euro-ISDN) Dimensions and weight DxWxH 205 x 255 x 75 mm Weight 700 g Ambient conditions according to DIN IEC 721 Operation + 5 ... + 45 °C Transport - 25 ... + 70 °C Storage - 25 ... + 55 °C Data storage without power supply > 10 years (no battery required) Conformity The Eurit 33 / 33 plus complies with all relevant EU guidelines and requirements.
Important information Default settings / delivery status 20312912en_ba_a0 Your Eurit 33 / 33 plus is delivered with the following settings: Parameter Autodial (hotline) Call forwarding with keypad Incoming EAC Transfer with disconnect Call transfer Send keypad automatically Headset Suppress number (CLIR/COLR) Call waiting Call filter Call forwarding Language Display contrast Current user Provider Automatic provider choice Redial attempts Interval between 2 redial attempts Ringing volume Handset / loudspea
Important information Menu structure Basic State Phonebook Name Number Reaction Attribute Functions Settings Call FWD Type Number Taxes User Total Alarm Interval Time Mail (UUS) Text Number Info message Recipient Recording Hotline Number TAM Greeting Greeting No. of rings Rings / Ring save Record Rec. time / Listen TAM capacity Suppl. services 10 / 15 / 22 min.
Important information Installation Set MSN Set MSN X MSN X Date / Time Date Time Contrast Setting PBX Exch. acc. code (EAC) Setting Incoming EAC on / off Transfer on-hook on / off Connect EURO / Disconnect Keypad auto. on / off Surveillance on / off Remote access VIP no. Taxes User X VIP no.D3 Remote access PIN PIN Remote access rings No.
Index A Acoustic signals ........................................ Advanced features .................................... Automatic callback ................................... Automatic redial ................................ 29, G Greetings ................................................. 56 10 23 29 43 H Handsfree ................................................. Headset .................................................... Help message ........................................... Hotline ..............
Index R Reactions .................................................. Recording quality ...................................... Recording time ......................................... Redial ....................................................... Reject ....................................................... Remote access functions ........................... Reset functions ......................................... Ring count ................................................ Room surveillance ...............
✁ 20312912en_ba_a0 Labels ✁ ✁
ABSC 20312912/A0 Manufactured in Switzerland by: Ascom Business Systems Ltd Eichtal CH-8634 Hombrechtikon http://www.ascom.
